See comments in text below:

> -----Original Message-----
> From: Matthew Leigh [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 12 April 2002 12:59 PM
> To: Protel EDA Forum
> Subject: [PEDA] Duplicate pins in schlib
> 
> 
> I'm drawing up a library component for an Atmel 
> microcontroller, which has 
> a large number of multi-function pins (for instance, pins 
> 32-39 are either 
> an 8-bit I/O port or half of the memory bus). I can see two ways of 
> representing this in the schematic library:
> 
> 1) Place 40 pins and give each one a title like "PA0 (AD0)".
> 

Yes this one - use one pin per physical IC pin and use descriptive pin
names, i.e. my pic chip parts have pins with names like RA0/AN0.

-snip-

> 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to