At 10:58 AM 12/04/02 +0800, you wrote: >I'm drawing up a library component for an Atmel microcontroller, which has >a large number of multi-function pins (for instance, pins 32-39 are either >an 8-bit I/O port or half of the memory bus). I can see two ways of >representing this in the schematic library: > >1) Place 40 pins and give each one a title like "PA0 (AD0)".
Yes, go with this one. I take the view that if there is one pin on the PCB there should be one pin on the SCH. (I also show all pins on the SCH including NC and all power pins - it makes debugging easier, IMO). Ian Wilson * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
