Speaking just to the second part of your question as applied to item 2), i.e. the "legality".
Whether it is "legal" or not, being as charitable and kind as possible, it is simply a very bad idea. JaMi Smith * * * -----Original Message----- From: Matthew Leigh [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 11, 2002 7:59 PM To: Protel EDA Forum Subject: [PEDA] Duplicate pins in schlib I'm drawing up a library component for an Atmel microcontroller, which has a large number of multi-function pins (for instance, pins 32-39 are either an 8-bit I/O port or half of the memory bus). I can see two ways of representing this in the schematic library: 1) Place 40 pins and give each one a title like "PA0 (AD0)". 2) Place one pin for each function but with duplicate pin numbers (so there's two of each pin, with different names). Which, or both, of these methods is legal (Protel 99SE) and which is advisable? Thanks Matthew Leigh * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
