I find that when the print preview is not working properly that I can get the preview correct by highlighting the printer within the design explorer, then editing the properties. Sometimes just touching the printer settings then Process PCB. Dave Eloranta Locus Inc. Madison, WI [EMAIL PROTECTED]
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, June 05, 2002 8:07 PM To: Protel EDA Forum Subject: Re: [PEDA] Print/Preview Problem I've had problems if I don't have the actual pcb file opened as well as the ppc viewer. Cheers, Matthew van de Werken Electronics Engineer CSIRO Exploration & Mining - Gravity Group 1 Technology Court - Pullenvale - Qld - 4069 ph: (07) 3327 4685 fax: (07) 3327 4455 email: [EMAIL PROTECTED] > -----Original Message----- > From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 6 June 2002 10:43 AM > To: 'Protel EDA Forum' > Subject: Re: [PEDA] Print/Preview Problem > > > That happened to me. Then I have setup the default to Zoom > All or display > full page and it worked fine since. I don't remeber exactly > what I did. > > Igor > > > > -----Original Message----- > From: Ray Mitchell [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 6 June 2002 10:14 AM > To: Protel EDA Forum > Subject: [PEDA] Print/Preview Problem > > > I'm using Protel 99SE with SP6 on Win2K. I can create a .PPC > from a .PCB, > play with it, print it out, etc. without a problem. However, > when I go to > another project then return to my .PPC, or close Protel then > reopen and > return to my .PPC, although the .PPC is still there it > appears empty. I do > a "Browse PCB Print" and it still lists all the correct > layers I originally > set up, but they simply don't appear. I do a "Rebuild" but nothing > happens. Finally, I discovered that if I do a "Process PCB" > the selected > layers reappear but the page has been shrunk down to a very > tiny size. I > must change the view to get it back to where I started. Is > this a bug or a > feature or am I simply doing something wrong? > > Thanks, > Ray Mitchell > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
