Something else odd about this file. The split plane poly lines you have are individually moveable, as if they were free tracks. If I place another split plane poly on there, I cannot 'detact' one of the lines like I can with yours.
????? > -----Original Message----- > From: Juha Pajunen [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 25, 2002 1:23 AM > To: Protel EDA Forum > Subject: [PEDA] Pad and Via clearance compared to PowerPlaneLayer (neg. > layer) > > > Hi, > > Can you help / explain me about these two > "issues" on this file > http://groups.yahoo.com/group/protel-users/files/junk/ > > There is two issues on that file: > > 1. The BIG pad (50,30) connected to 1.8 net (split plane), > should DRC detect short circuit, because pad is NOT totally > inside 1.8 split plane? Why it is connected to 1.8 net, > whole pad IS NOT inside split plane? > > 2. Via on 1.8 net do acts really odd when moving it > close enought to split plane track, it gives short > circuit DRC error. Try to move it away from green > track and run DRC, NO error. Why and how it acts like > that and how to control it.. > I asked this from local Protel dealer and he said > it is BUG!? and Protel knows it... > > I looked at BUG-LIST on Yahoo but did not find > anything about these "issues"... > (My english is not so good) > > I asked these same question some time ago but... > no one "helped" me :I > > Sincerely, > Juha Pajunen, Hw Engineer > Bitboys Oy > E-mail: [EMAIL PROTECTED] > ------------ > NOTE: This message, and any attached files, may contain > privileged or confidential information. It is intended for use > only by the > designated recipients. Any disclosure, copying or distribution of, or > reliance upon, this message by anyone else is strictly prohibited. > > > ************************************************************************ > * Tracking #: 91E558BF1B9E3946B274CE35CF821AE74BE3EACC > * > ************************************************************************ > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
