John If you visit the Protel website and check out the knowledge base, there is an explanation how to load a netlist. Personally I dont see anything easier than "LOAD NETLIST" so I dont understand why the change unless it was to speed the code up.
Mike Reagan EDSI Frederick MD > -----Original Message----- > From: John Ross [mailto:[EMAIL PROTECTED]] > Sent: Friday, August 09, 2002 12:57 PM > To: Protel EDA Forum > Subject: [PEDA] DXP Net lists > > > Is it my imagination or does the net list generator in DXP SCH > tools no longer support other vendors formats (PADS PPCB) or a > straight wire list? > > > > Best Regards > > John A. Ross > > RSD Communications Ltd > 8 BorrowMeadow Road > Springkerse Industrial Estate > Stirling, Scotland FK7 7UW > > Tel +44 [0]1786 450572 Ext 225 (Office) > Tel +44 [0]1786 450572 Ext 248 (Lab) > Fax +44 [0]1786 474653 > GSM +44 [0]7831 373727 > > Email [EMAIL PROTECTED] > WWW http://www.rsd.tv > ========================================== > > > ************************************************************************ > * Tracking #: CA69BDB9DB347C47AE9421E47845E1CAC94BC34F > * > ************************************************************************ > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
