Or get one of us suckers to do it for ya!
-----Original Message----- From: Michael Reagan [mailto:[EMAIL PROTECTED]] Sent: Friday, August 09, 2002 1:25 PM To: Protel EDA Forum Subject: Re: [PEDA] DXP Net lists John Im not the real person to answer that but I think that was eliminated also. I could be wrong (any help out there?) You will have to do what I did spent another 1- 2K for a netlist translator from RSI Mike > -----Original Message----- > From: John Ross [mailto:[EMAIL PROTECTED]] > Sent: Friday, August 09, 2002 3:41 PM > To: Protel EDA Forum > Subject: Re: [PEDA] DXP Net lists > > > > > -----Original Message----- > > > From: John Ross [mailto:[EMAIL PROTECTED]] > > > Sent: Friday, August 09, 2002 12:57 PM > > > To: Protel EDA Forum > > > Subject: [PEDA] DXP Net lists > > > > > > > > > Is it my imagination or does the net list generator in DXP SCH > > > tools no longer support other vendors formats (PADS PPCB) or a > > > straight wire list? > > > -----Original Message----- > > From: Michael Reagan [mailto:[EMAIL PROTECTED]] > > Sent: 09 August 2002 18:29 > > To: Protel EDA Forum > > Subject: Re: [PEDA] DXP Net lists > > > > > > John > > If you visit the Protel website and check out the knowledge base, > > there is an explanation how to load a net list. > > Personally I don't see anything easier than "LOAD NETLIST" so I don't > > understand why the change unless it was to speed the code up. > > Hi Mike > > Probably I did not make myself too clear, sorry (BTW thanks for the > detailed info in the other post, yeah, PukeLogic ???? :), I actually > pay maint. for that to support 1 customer :( ) > > My concern was not how to get the net list from DXP(SCH) to > DXP(PCB) but more along the lines of how to use the netlist exported > from DXP(SCH) in other packages, such as PowerPCB. > > In 99SE you could choose the netlist format to export (Design->Create > Netlist & pick Pads ASCII or other o/p format) so in the case of PPCB > 2 files were created. In the case of the wirelist I sometimes supply > that so the test guys can have it for verification. > > But in DXP the option to pick these different formats I cannot find. > They seem to be fixed as they appear in the menus. So no easy way to > get from DXP(SCH)->PPCB without a third party translator. > > I don't relish the thought of spending more $$$ to get back > functionality that was even there in P98, if indeed, it has been > removed in DXP. > > Ill look further and see if I am mistaken or if there is another > method of accomplishing the same task that I have missed. > > Cheers > > Best Regards > > John A. Ross > > RSD Communications Ltd > 8 BorrowMeadow Road > Springkerse Industrial Estate > Stirling, Scotland FK7 7UW > > Tel +44 [0]1786 450572 Ext 225 (Office) > Tel +44 [0]1786 450572 Ext 248 (Lab) > Fax +44 [0]1786 474653 > GSM +44 [0]7831 373727 > > Email [EMAIL PROTECTED] > WWW http://www.rsd.tv > ========================================== > > ********************************************************************** > ** > * Tracking #: E5C7434AF85AAC4BA9651F115ACA2A06FAF0BD02 > * > ************************************************************************ > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
