JaMi Edit, Move Split Plane vertices will do it.
Ian ----- Original Message ----- From: "JaMi Smith" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Cc: "JaMi Smith" <[EMAIL PROTECTED]> Sent: Friday, September 13, 2002 1:29 PM Subject: [PEDA] Can I edit split planes > In Protel 99 SE, I have 4 split planes, with the outer ones being ground > with only one split, between analog and digital, to provide a good solid > ground for all of the LVDS controlled impedence goodies on the outer 2 > layers. > > Remaining 2 inner planes are split to provide 2 different supplie voltages > each to each of 3 different little BGA's. > > I took the time to build all of the "split planes" in the in the "Split > Planes" manager, and they all look just great. > > Problem is that I want to extend the entire left side if the board .500" and > move everything to the right by that amount, and this means that the left > edge of about half or the 18 plane segments need to be redrawn. > > I know you can change the netname of a split plane segment, I've done that > successfully in the past. > > I know you can move an entire split plane segment, I've done that > successfully in the past. > > Can I just go in there and "edit" (as in lengthen) or "move segments of the > split plane segment? > > In the past I have simply deleted them and redrawn them ass necessary, but > here I ave a lot so I thought I would see if anyone has done this before. > > Seems pretty straight forward, and should work, but I can't afford a screw > up on this project. > > Thanks, > > JaMi Smith > > > > ************************************************************************ > * Tracking #: 48EA28AE08D5BC40A988FC196CDE84615A1BFBF5 > * > ************************************************************************ > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
