very good! thanks ds
Rolf Molitor wrote: > > You can edit the power symbols like this: > Get the System Menu (down arrow) and select "Customize". > Right click the "Power objects" and select "Edit". There you see all your > actual power objects. > You can add new power objects here or change the existing ones with right > click and "New" or "Properties". > When you select "Properties" you will see what bitmap file this power object > uses. Just edit the bitmap to change the view of the power object. > > Regards > Rolf Molitor > Ing.Buero i2e > Remscheid / Germany > > ----- Original Message ----- > From: "Dennis Saputelli" <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Friday, July 30, 2004 6:41 PM > Subject: Re: [PEDA] changing power symbols > > > you cant make your own power symbols > > > > but if you make a part with a pin (it can be very short) > > you should get a hot spot > > of course these parts would show in your BOM > > but this is where 'include blank part value' checkbox > > comes in handy, should be acceptable > > > > what do y'all use across the pond anyway ? > > > > > > Dennis Saputelli > > > > > > Leo Potjewijd wrote: > > > > > > Hi, > > > at the risk of asking an old question: > > > Has anyone found a way to change the shape of the built-in power symbols > of > > > P99SE? We use different symbols here in Europe.... > > > I know I can build my own (I have a wide collection of them) but the > lack > > > of an electrical hotspot on these is (finally) getting to my nerves.... > > > > > > Leo Potjewijd > > > hardware designer > > > Integrated Engineering B.V. > > > > > > [EMAIL PROTECTED] > > > +31 20 4620700 > > > > > - > > _______________________________________________________________________ > > Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 > > 2851 21st Street Fax: 415-647-3003 > > San Francisco, CA 94110 www.integratedcontrolsinc.com > > > > > > -- _______________________________________________________________________ Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 2851 21st Street Fax: 415-647-3003 San Francisco, CA 94110 www.integratedcontrolsinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
