Jon

I dont believe for a minute that you know what you are doing.  These are some pretty 
harsh words but dont blast a product (ELECTRA)that failed to route only becuase you 
dont understand how it works. If Electra didnt work then Spectra wont work either.   
SPECCTRA is a world class router, whose performance has not been equaled.  I dont 
expect you could get this router to work either.   The command set is the same for 
both routers... so SPECCTRA sucks too ...right?

Learn to use the damm program before you release your ignorant opinion.

Mike Reagan





---------- Original Message ----------------------------------
From: Jon Elson <[EMAIL PROTECTED]>
Reply-To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Date:  Mon, 13 Sep 2004 16:59:29 -0500

>I finally downloaded the Electra router and tried it on a board
>I had just routed with the P99SE default router.  I thought Protel
>did badly, but the Electra board was a nightmare.  It wasn't
>even able to complete all the nets, it left about 5 undone.
>Protel made a fair jumble of traces all over the place, but Electra
>literally filled the entire area within the keepout border with tracks!
>
>I can't say for sure whether I had all the settings right (actually, I 
>haven't
>found anywhere in Electra to set options, etc.) so I'm not sure this
>is a good comparison, yet, but so far I'm not very impressed, to
>say the least.
>
>Since this was discussed a while ago, I thought I would give a report.
>
>Jon
>
>
>
>



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to