Hi Frank, Many thanks for that, it worked. Just had to disable the normal output and let the line out output be active only. gonna dive into the referenece guide again. Gives a bit of a fresh motivation now I can at least produce some sound. thanks again.
Ronald Op 11 feb 2011, om 19:45 heeft Frank Carmickle het volgende geschreven: > Hi Ronald > > When you are in AMS, audio midi setup, there is a table that selects the > device your configuring. When you choose pro tools aggregate i/o you will > then see another table where the devices you want to include can be checked > or unchecked. Check the ones you want to include and uncheck those you > don't. Be where that when you check them they jump to the top of the table. > When you uncheck them they drop to the bottom of the table. If you have a > bunch of things you want in a specific order you need to enable them in the > reverse order that you want them to show up in the list. > > If you need more help just ask. > > HTH > --FC > > > On Feb 11, 2011, at 6:36 AM, RvR wrote: > >> Hi guys, >> Since you are talking about outputs and all you don't mind me throwing in >> some dummy questions also? >> While struggling through the reference guide for PT 9 I tried to get some >> sound out it already. I use PT 9, internal audio of my Mac Pro for the time >> being and a set of speakers connected to the line out jack. >> I selected the Aggregate device in the Hardware setup for my internal audio >> chip. Once I got some sound out of it, but came from the internal speaker >> only. Don't know what I did after that but cannot get any sound anymore at >> all. >> The i/o settings are as follows: >> Input: >> Don't see any to be honest, think defaults are active here. >> Output: >> Controller Meter Path: Out 1-2 >> Audition Path: A1-2 >> Default Output Bus: Out 1-2 >> >> On the track input and output settings all the above are selected. >> So how can I configure the sound comes out of the line out to my external >> speakers? If that's possible at all. >> a man's got to srart somehwere right? LOL >> Thanks, >> Ronald > >
