Slau wrote: My understanding, when I brought this up around 2 years ago, was that it simply didn't work with bars and beats. I did wonder, however, if it couldn't be facilitated by pressing asterisk then plus first and then minus and the bars to have PT essentially recognize that it's about to receive a number entry but, while it's waiting, if a minus key is pressed, it's made aware that this minus, which was preceded by a plus, is meant to designate an offset rather than a bar number. To me, it makes perfect sense but, then again, maybe there's a good reason why they can't do that or why it wouldn't work logically.
Phil replied: from a programmers stand-point I can see some potential issues with this. E.G. how long would you have PT wait for the next input etc. -----Original Message----- From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of Slau Halatyn Sent: 27 January 2018 02:01 To: PTAccess List Subject: Re: new features and shortcuts in the new Pro Tools 2018.1 My understanding, when I brought this up around 2 years ago, was that it simply didn't work with bars and beats. I did wonder, however, if it couldn't be facilitated by pressing asterisk then plus first and then minus and the bars to have PT essentially recognize that it's about to receive a number entry but, while it's waiting, if a minus key is pressed, it's made aware that this minus, which was preceded by a plus, is meant to designate an offset rather than a bar number. To me, it makes perfect sense but, then again, maybe there's a good reason why they can't do that or why it wouldn't work logically. I'll run it by them again. Cheers! > On Jan 26, 2018, at 7:05 AM, Martin (Punky) Sopart <m...@cakewalker.de> wrote: > > Hello Slau! > > Ah ok, of corse I'm working with bars etc. > Thanks for pointing out. > I understood the manual that it is also possible. > > Best! / Martin >> -----Original Message----- >> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] >> On Behalf Of Slau Halatyn >> Sent: Friday, January 26, 2018 3:47 PM >> To: PTAccess List <ptaccess@googlegroups.com> >> Subject: Re: new features and shortcuts in the new Pro Tools 2018.1 >> >> Hi Martin, >> >> Actually, it does work. I did it just now. Perhaps what you're thinking of is >> that it doesn't work when you're in bars and beats. In that case, a minus in >> front of the bar number would assume there are negative count-in bars >> before bar 1, which is a common thing. I've pointed this out and asked if it >> might be possible to somehow move backwards by a fixed number of bars >> with a key sequence but that hasn't been tackled yet. As for minutes and >> seconds, the sequence does work. >> Cheers, >> Slau >> >>> On Jan 26, 2018, at 2:02 AM, Martin (Punky) Sopart <m...@cakewalker.de> >> wrote: >>> >>> Hi Slau! >>> >>> Sounds very interesting. >>> Thanks for supporting us over there. >>> >>> Maybe you could ask for another all time bug. >>> I reported it several times to Avid. >>> >>> Moving e.g. 7 bars forward by pressing Numpad-Star, Numpad-Plus, >> Numpad-7, Numpad-Enter works great. >>> But the opposed direction - using Numpad-Minus instead of Numpad-Plus - >> does not work at all but is still in the Pro Tools manual. >>> >>> Best! / Martin >>>> -----Original Message----- >>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] >>>> On Behalf Of Slau Halatyn >>>> Sent: Thursday, January 25, 2018 10:28 PM >>>> To: PTAccess List <ptaccess@googlegroups.com> >>>> Subject: new features and shortcuts in the new Pro Tools 2018.1 >>>> >>>> There are a bunch of new features and shortcuts in Pro Tools 2018.1 >>>> announced today at NAMM. Yes, the version numbers are different now >> and >>>> reflect year dot month of release. Anyway, below is a brief look at the >> new >>>> shortcuts and their functions but first, the big news: >>>> >>>> The track record button now accurately reports when it is selected. No >> more >>>> having to read the button multiple times to verify whether it's armed or >> not >>>> because of it flashing on and off. The same applies to the Global Record >>>> button in the Transport. This has been an issue from day one and I asked >> that >>>> this be made a priority fix last time I visited Avid and it went through a few >>>> iterations in beta before they got it right but they did nail it. Yay for fixes! >>>> >>>> >>>> Designate current playlist as target playlist >>>> Command+Shift+right arrow >>>> Any playlist can now be designated as the target playlist to which clips or >>>> selections from any other playlist can be copied or moved. When a playlist >> is >>>> selected, pressing Command+Shift+Right Arrow designates that playlist as >>>> the target playlist. >>>> >>>> Copy selection to target playlist >>>> Shift+Option+up arrow >>>> Let's say you've created a track called Vocal and you've recorded a >> number >>>> of takes on playlists. Let's assume you have four recorded takes on >> playlists >>>> named Vocal.01, Vocal.02, Vocal.03 and Vocal.04. Let's say you've >> designated >>>> Vocal as the target playlist. For clarity, let's assume you renamed the >> playlist >>>> Vocal Comp and your goal is to compile a series of clips or selections from >> the >>>> various takes to put on the comp track. Let's say you decided that take 3 >> was >>>> the overall best take. Using Shift+Up/Down Arrows, you'd select the >> Vocal.03 >>>> playlist, select the entire range of the timeline and simply press >>>> Option+Shift+Up Arrow to copy it to the target playlist, Vocal Comp, >> without >>>> having to copy, then select the Vocal Comp playlist and paste. It's just one >>>> shortcut. Of course, you'll still be on Vocal.03. So, now, let's say you know >>>> that the first phrase in verse 2 is better in take 4. You can Shift down >> Arrow to >>>> get to vocal.04, select the phrase in question and hit Option+Shift+Up >> arrow >>>> to send it to Vocal Comp. Essentially, this workflow replaces the use of >>>> playlist lanes where one would have to click in a lane, solo it to hear it and >>>> then press Control+Option+v to copy to the Main Playlist. The Main >> playlist is >>>> the currently selected playlist and, now with the introduction of a Target >>>> playlist, one can essentially send from any playlist to any designated >> target >>>> playlist. >>>> >>>> Move selection to target playlist >>>> Option+Shift+t >>>> If, instead of copying a clip or selection to the target playlist, you'd rather >>>> move the selection to the target playlist rather than copying, >> Option+Shift+t >>>> is your friend. Flo Tools users will recognize that this Keyboard shortcut is >> the >>>> the command to Speak Selected Tracks. The new version of Flo Tools now >>>> uses a different shortcut. Refer to the What's New in Flo Tools document >> to >>>> find out more. >>>> >>>> Toggle recent playlists >>>> Shift+left arrow >>>> Pressing this shortcut will simply toggle quickly between 2 playlists >>>> >>>> Show target playlist >>>> Shift+right arrow >>>> No matter how many playlists you have or which playlist is currently >> selected, >>>> pressing Shift+Right Arrow will select the Target Playlist. >>>> >>>> Cycle in audio from previous playlist >>>> Command+Shift+up arrow >>>> Cycle in audio from next playlist >>>> Command+Shift+down arrow >>>> These two commands are perhaps the most powerful playlist editing >>>> shortcuts. what these commands do is cycle in audio from other playlists >>>> when a selection range is made. Without having to switch playlists, it's >> now >>>> possible to audition audio from other playlists in context. Let's say you >> were >>>> on your Vocal Comp playlist and you had your previously recorded 4 takes >>>> and you had chosen take 3 as overall best take, just like the previous >>>> scenario. Let's say the song was "Mary Had a Little Lamb." So let's say you >> had >>>> your chosen take copied into the target playlist and you're listening to the >>>> first line and the word "little just doesn't sound right. What you can now >> do is >>>> select the word "little" in the playlist and press Command+Shift+Down >>>> Arrow. Now, the word "little will be the performance from Vocal.01. >>>> Everything else remains the same and unchanged. Only the word "little" >> has >>>> changed. Pressing Command+Shift+Down Arrow again will now cycle in >>>> "little" from Vocal.02. You can continue to audition the selected range >> from >>>> each available playlist until you're happy with the performance. When >> you're >>>> satisfied, you can simply continue on. The entire time, you've never left >> the >>>> Target playlist and only the selected range was cycling through the other >>>> available playlists. Think of this as sort of selecting a different playlist for >> only >>>> the selected range rather than the entire timeline. It's extraordinarily >>>> powerful and, if you use Pre/Post Roll, you can audition the target playlist >> in >>>> context so you hear the result of the edit before committing to it. As long >> as >>>> your selection range stays in tact, you can keep cycling up or down. When >>>> you're happy with the choice, simply move on. >>>> >>>> Retrospective MIDI record >>>> Shift+c >>>> Some of you will remember the trick of hitting record at the end of a >>>> rehearsal take to be able to expand the audio in the buffer. Whenever >>>> people say, "Oh, I wish we had been recording," as long as the transport is >>>> still rolling when they say it, you can easily retrieve the performance. Well, >>>> now the same thing exists for MIDI. Press Shift+c to capture the MIDI >>>> performance that was happening while the transport was engaged. >>>> >>>> Transpose Selected MIDI note up/down by half step >>>> up/down arrows >>>> When a MIDI note is selected in Notes View, pressing Up/Down Arrow >> will >>>> transpose it on the fly by a semitone. This is great for quick MIDI note >> editing. >>>> Thing is, this is also the shortcut for capturing the current time code into >> the >>>> Start Counter. Down Arrow will still do this when in an audio track and will >>>> also work in a MIDI track if there's no note selected. Otherwise, if you >> press >>>> down arrow while the transport is engaged, what you'll actually do is >>>> transpose the selected note down again by one half step. The bottom line >> is >>>> that there are a number of shortcuts now in Pro Tools that do one thing in >> an >>>> audio track and a different thing in a MIDI track. Be careful and stay aware >> of >>>> what is currently selected and you'll be fine. >>>> >>>> Transpose Selected MIDI note up/down by octave >>>> Shift+up/down arrows >>>> Same rules apply as above but instead of semitone, notes are transposed >> by >>>> octave. >>>> >>>> Transpose Selected MIDI Note Up/Down in Key >>>> Control+up/down arrow >>>> This command relies on key signature and chord recognition which is not >> yet >>>> accessible but, by default, you might have some success. Essentially, >> rather >>>> than chromatic tranposition, notes will increment based on chord. >>>> >>>> Note that adding the Option modifier to the above transposition shortcuts >>>> will duplicate the selected note before transposing. In other words, if you >>>> have b3 selected and you press Option+Up Arrow, the b3 will remain and >> a >>>> new note with the pitch c4 will be created at the same point in the >> timeline. >>>> Pressing Up Arrow again will transpose the c4 to C Sharp 4. This is a fast >> way >>>> to stack notes to generate chords in place. >>>> >>>> You can think of the following shortcuts as equivalents to the shortcuts >> used >>>> to trim the left and right edges of selected clips only this works for >> selected >>>> MIDI notes. >>>> Trim note on by current nudge value >>>> Control+left/right arrow >>>> Trim note on by next greater nudge value >>>> control+Shift+left/right arrows >>>> Trim note off by nudge value >>>> Option+left/right arrows >>>> Trim note off by next greater nudge value >>>> Option+Shift+left/arrows >>>> >>>> The following shortcuts provide a quick way of raising or lowering MIDI >> Note >>>> On values on the fly rather than typing in a value. >>>> Increase/decrease velocity by 5 >>>> Command+up/down arrows >>>> Increase/decrease velocity by 15 >>>> Command+Shift+up/down arrows >>>> >>>> Save track preset >>>> Option+Shift+p >>>> >>>> Track Presets are new to Pro Tools and it's beyond the scope of this email >> to >>>> cover how track presets work. You'll need to refer to the What's New pdf >> to >>>> get the scoop on that. >>>> >>>> Hope this helps, >>>> >>>> Slau >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >> Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com >>>> <mailto:ptaccess+unsubscr...@googlegroups.com> . >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
