I was considering something similar for OpenBSD on Soekris and ALIX boards. I'll take a closer look at your stuff this afternoon.
Thanks. On 2008-11-26, Tyler Booth <[EMAIL PROTECTED]> wrote: > Following up on Russell's excellent presentation on OpenWRT last week, > I've developed a set of scripts to automatically > provision an OpenWRT ap or router for your network including firmware > flashing, setting the system clock (via NTP), package setup > and configuration uploading. While I realize this doesn't hold much > utility for the average user, anyone that provisions multiple OpenWRT > devices with similar configurations on a regular basis may find this > useful. > > Basically once you've set your configuration environment once, you > plug in the device you want to configure > press a button and 3-4 minutes later you have a fully operational AP > containing your stock configuration without > any required user intervention. > > http://www.stephouse.net/files/openwrtprovisioner/openwrtprovisioner.v0.1.tgz > > DISCLAIMER: don't run it if you don't understand what it's doing. > DISCLAIMER2: This has only been tested with Kamikaze v8.09 RC1 with a > Ubiquiti Nanostation > > Tyler Booth // President > ph. 503.548.2000 | fx. 503.548.2002 > 921 SW Washington St, Suite 224 > Portland OR 97205 > > > > > > --~--~---------~--~----~------------~-------~--~----~ The Personal Telco Project - http://www.personaltelco.net/ Donate to PTP: http://www.personaltelco.net/donate Archives: http://news.gmane.org/gmane.network.wireless.portland.general/ Etiquette: http://www.personaltelco.net/index.cgi/MailingListEtiquette List information: http://lists.personaltelco.net To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] -~----------~----~----~----~------~----~------~--~---
