I made a few updates, anyone that downloaded the original copy, I'd suggest you upgrade. Changes include
1. "friendlier" base opkg-configuration that will meet the needs of a wider audience. 2. Optional logging output for debugging when something goes wrong. (default output on the screen is unhelpful) Rather than linking to the updated file, go to the following URL where you can check for updates: http://www.stephouse.net/files/openwrtprovisioner/ Tyler Booth // President ph. 503.548.2000 | fx. 503.548.2002 921 SW Washington St, Suite 224 Portland OR 97205 On Nov 26, 2008, at 2:00 PM, Tyler Booth wrote: > Following up on Russell's excellent presentation on OpenWRT last > week, I've developed a set of scripts to automatically > provision an OpenWRT ap or router for your network including > firmware flashing, setting the system clock (via NTP), package setup > and configuration uploading. While I realize this doesn't hold much > utility for the average user, anyone that provisions multiple OpenWRT > devices with similar configurations on a regular basis may find > this useful. > > Basically once you've set your configuration environment once, you > plug in the device you want to configure > press a button and 3-4 minutes later you have a fully operational AP > containing your stock configuration without > any required user intervention. > > http://www.stephouse.net/files/openwrtprovisioner/openwrtprovisioner.v0.1.tgz > > DISCLAIMER: don't run it if you don't understand what it's doing. > DISCLAIMER2: This has only been tested with Kamikaze v8.09 RC1 with > a Ubiquiti Nanostation > > Tyler Booth // President > ph. 503.548.2000 | fx. 503.548.2002 > 921 SW Washington St, Suite 224 > Portland OR 97205 > > > > > --~--~---------~--~----~------------~-------~--~----~ The Personal Telco Project - http://www.personaltelco.net/ Donate to PTP: http://www.personaltelco.net/donate Archives: http://news.gmane.org/gmane.network.wireless.portland.general/ Etiquette: http://www.personaltelco.net/index.cgi/MailingListEtiquette List information: http://lists.personaltelco.net To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] -~----------~----~----~----~------~----~------~--~---
