Nops.

In fact, I tried to add using the ptxdist menu but the compilation failed.

The build process search for a file in the kernel package and don't
find anything. And I didn't find the configuration in the kernel
configuration menu.

How should I have to do to add the device tree?

Thank you and best regards,

Flavio


2010/9/24 Juergen Beisert <[email protected]>:
> Flavio de Castro Alves Filho wrote:
>> I am currently trying to build a ptxdist application for the Freescale
>> PowerPC MPC8313 RDB board.
>>
>> I configured the linux kernel 2.6.34 using the
>> 83xx/mpc8313_rdb_defconfig configuration file and compiled with the
>> gcc 4.3.2 from the OSELAS toolchain project for the powerpc-603e.
>>
>> All the compilation works fine, from both kernel and root filesystem.
>> When I load the kernel to the board, the kernel is correctly load and
>> uncompressed but the boot does not occur. After the uncompression, it
>> hangs. The kernel is loaded in the memory position 0x1000000 and the
>> bootargs is "rw console=ttys0,115200 root=/dev/nfs".
>>
>> Does anybody have any idea about what is causing this problem?
>
> Did you provide a Device Tree for your platform?
>
> jbe
>
> --
> Pengutronix e.K.                              | Juergen Beisert             |
> Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
> Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
>

-- 
ptxdist mailing list
[email protected]

Reply via email to