Hello Juergen,

Thanks for the advice. I saw at the powerpc list that there are some
issues concerning the use of the mainstream kernel in the mpc8313erdb
board revc. And, unfortunatelly, I had to use the old kernel.

I could correctly set up the oftree to build the dtb file and it worked fine.

Thank you for your help,

Flavio

2010/10/26 Juergen Beisert <[email protected]>:
> Hi Flavio,
>
> Flavio de Castro Alves Filho wrote:
>> I did what you suggested: I set up ptxdist to build the device tree
>> from the kernel package (I am using the kernel.org version instead of
>> the git) and I loaded the generated dtb file (oftree) in u-boot before
>> launch the boot. It is still not working. I am also using the
>> configuration file located at the kernel package and I am applying no
>> patch files.
>>
>> Does the linux-2.6.34 mainstream kernel work with MPC8313ERDB board?
>
> You should ask the PowerPC kernel people about that issue. I don't know the
> MPC8313ERDB and its current state in the mainline kernel.
> As ptxdist can only build the kernel and the oftree, it cannot ensure that
> both are working together. So, your questions are not related to ptxdist
> anymore.
>
>> The Freescale's package comes with the linux-2.6.23 kernel, and I
>> would like to use a newer version?
>
> Yes, working with the most recent one is always a good choice. The advantage
> is, you can ask the developers and you will get answers (you can also ask for
> an older kernel, but I think there will be noone with an answer).
>
> Juergen
>
> --
> Pengutronix e.K.                              | Juergen Beisert             |
> Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
> Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
>

-- 
ptxdist mailing list
[email protected]

Reply via email to