Hello,

I did what you suggested: I set up ptxdist to build the device tree
from the kernel package (I am using the kernel.org version instead of
the git) and I loaded the generated dtb file (oftree) in u-boot before
launch the boot. It is still not working. I am also using the
configuration file located at the kernel package and I am applying no
patch files.

Does the linux-2.6.34 mainstream kernel work with MPC8313ERDB board?

The Freescale's package comes with the linux-2.6.23 kernel, and I
would like to use a newer version?

Thank you for your help.

Best regards,

Flavio

2010/9/24 Juergen Beisert <[email protected]>:
> Flavio de Castro Alves Filho wrote:
>> Nops.
>>
>> In fact, I tried to add using the ptxdist menu but the compilation failed.
>>
>> The build process search for a file in the kernel package and don't
>> find anything. And I didn't find the configuration in the kernel
>> configuration menu.
>
> Yes, its up to you to provide a firmware device tree. ptxdist only can build
> it.
>
>> How should I have to do to add the device tree?
>
> Quick guess: You can try with the file
> in "arch/powerpc/boot/dts/mpc8313erdb.dts" (seen in the current linux-git).
> Check for the correct setup of the serial console and use this device tree at
> runtime with your kernel
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K.                              | Juergen Beisert             |
> Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
> Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
>

-- 
ptxdist mailing list
[email protected]

Reply via email to