Hi,
Thanks Tanu for your feedback.
On these pictures you can see the sound level at 100% display on top bar
sound widget and at Gnome sound settings.
Sound widget:
https://plus.google.com/102144018413535329430/posts/JAvrooEA66p
Sound settings:
https://plus.google.com/102144018413535329430/posts/gWTMYYYwwRA
Video showing, how the sound input is starting to work, after a bit
change on input sound level volume.
https://plus.google.com/102144018413535329430/posts/H9apGEdEzw7
Also i attach pactl output when sound input isn't working.
Thanks in advance.
Gustavo.
On 8/8/16 12:37 PM, Tanu Kaskinen wrote:
On Mon, 2016-08-08 at 12:06 -0300, Gustavo Duarte wrote:
Attached you can find the outputs requested.
There are changes in the "Capture" and "Internal Mic Boost" volume
levels in alsa, and in the source volume level in pulseaudio.
In the non-working case:
Capture:
Front Left: Capture 13 [42%] [3.00dB] [on]
Front Right: Capture 13 [42%] [3.00dB] [on]
Internal Mic Boost:
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
Source volume in pulseaudio:
Volume: 0: 14% 1: 14%
0: -51,00 dB 1: -51,00 dB
In the working case:
Capture:
Front Left: Capture 11 [35%] [0.00dB] [on]
Front Right: Capture 11 [35%] [0.00dB] [on]
Internal Mic Boost:
Front Left: 3 [100%] [36.00dB]
Front Right: 3 [100%] [36.00dB]
Source volume in pulseaudio:
Volume: 0: 32% 1: 32%
0: -29,80 dB 1: -29,80 dB
So in the working case the Capture volume is 3 dB lower, the Internal Mic Boost
volume is 24 dB higher, and the total difference (as shown by pulseaudio) is
21.2 dB. That is quite a lot, and perhaps explains why you don't hear anything
in the non-working case.
Based on this, the problem would appear to be simply too low source volume. In your original explanation,
however, you said that the input volume is 100% when it's not working, and setting the volume in sound
settings to 20% makes it work. It would be good to know in more detail what you mean by "sound
settings" and "input volume". You could upload somewhere a screenshot of the sound settings
when it's not working and input volume is 100%, and while the sound settings are open in this state, run
"pactl list" again and send it to the mailing list.
--
Tanu
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Contador de uso: 1
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices
and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino
aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0
session_manager=local/ceibal:@/tmp/.ICE-unix/1300,unix/ceibal:/tmp/.ICE-unix/1300
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: RUNNING
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 48000Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 74% 1: 74%
0: -7,70 dB 1: -7,70 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 46260 usec, configurada 46000 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority:
9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: IDLE
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 341333 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo
analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: IDLE
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 48000Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 48215 usec, configurado 341333 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900)
analog-input-microphone: Micrófono (priority: 8700, not
available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Entrada de destino #6
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 10
Destino: 0
Especificación de sample: s16le 2ch 48000Hz
Mapa de canal: front-left,front-right
Formato: pcm, format.sample_format = "\"s16le\"" format.rate = "48000"
format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volumen: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Latencia de búfer: 68333 usec
Latencia de destino: 45488 usec
Método de resample: n/d
Propiedades:
window.icon_name = "skype"
application.icon_name = "skype"
media.role = "phone"
media.name = "Output"
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2576"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "skype"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id = "sink-input-by-media-role:phone"
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #2
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1296"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #6
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as
1093f2416a9062bee7147074621293839000000013000036"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"1093f2416a9062bee7147074621293839000000013000036"
Cliente #7
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1526"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #8
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1526"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #10
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2576"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "skype"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
application.icon_name = "skype.png"
Cliente #11
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2653"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "1946"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0,
sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1,
sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico
Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1,
sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida
(sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1
(HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency
offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority:
9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround,
output:hdmi-surround+input:analog-stereo
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
