On 8/11/16 11:23 AM, Tanu Kaskinen wrote:
On Thu, 2016-08-11 at 09:41 -0300, Gustavo Duarte wrote:
If the first thing I do after boot, is open settings, the audio
metter
shows activity, as following:
1) Boot
2) Open gnome sound settings, audio meter show activity.
If the first thing I do after boot, is record with parecord, the
record
work fine, and when open settings after that, audio meter show
acrivity.
1) Boot
2) parecord
3) CTRL+C to close parecord
4) A WAV file is generated with sound recoreded.
5) Open gnome sound settings, audio meter show activity.
In order to get pactl list output while sound settings are open, and
there's no audio meter activity, i had to break sound as following:
1) Boot
2) Open Skype, call Echo / Sound Test Service.
3) Try record a msg.
4) No msg was hear.
5) Open Gnome sound settings, audio meter no show activity.
6) While sound settings is open, get output of pactl. (attach
after-break-setting-open.pactl)
7) Change the volume input level on Gnome setting, just a bit, and
audio
meter start to showing activity.
8) While sound setting remain open, get output of pactl
(after-change-level-setting-open.pactl)
The pactl outputs show that you raised the volume from 16% to 20%. Is
that consistent with what you saw in the sound settings UI? The pactl
output doesn't show anything that would be obviously broken in the non-
working case.
Why is the volume in the broken state sometimes 100% and sometimes 16%?
Does Skype change the volume? If it does, does it also change it if you
put "flat-volumes = no" to ~/.config/pulse/client.conf?
I recorded a Video showing Skype try to adjust the volume level, first
it increase to 100% and then back to previous value.
https://plus.google.com/102144018413535329430/posts/a4DmRJYZ1Ah
Also i tried putting flat-volumes = no on client.conf and the same
behavior happens.
If you record something with parecord while the sound settings are
open, and the volume meter doesn't move, does that work?
After check again, and see the wav file size, I noticed, that
arecord
worked. To may playback the wav I had to reboot, let me show you the
sequence.
1) boot
2) Run pasuspender -- arecord --device=plughw:0 test1.wav
3) CTRL+C, to close previous cmd.
4) aplay test1.wav. Nothing is hear.
5) ls test1.wav show 101662 bytes.
6) reboot
7) aplay tes1.wav, I can listen the audio recorded.
Weird. If aplay doesn't play the file, does paplay?
No, with paplay also I can't listen audio. Seems like, after run
pasuspender all the sound system is stop working, also speaker.
In a short, doing this latest test, is clear that the thing is breaking
the sound is the Skype, the question is why, and why if change input
level volume, the problem is fixed ?
Any thought ?
Comparing the system state before and after Skype could show something.
You did a similar test already in the beginning, and that didn't show
anything else than that there were differences in volume, but nothing
was muted, so I don't really expect anything interesting to show up,
but since this is a bit more controlled test than in the beginning,
it's worth a shot. Here are the steps:
1) Boot
2) Open gnome sound settings, verify that the sound meter shows
activity.
3) Close gnome sound settings.
4) Run "amixer -c0 > before_skype.amixer".
5) Run "pactl list > before_skype.pactl".
6) Open Skype, call Echo / Sound Test Service.
7) Try record a msg.
8) No msg was hear.
9) Run "amixer -c0 > after_skype.amixer".
10) Run "pactl list > after_skype.pactl".
11) Open gnome sound settings, verify that the sound meter doesn't show
activity.
Attached you can find the outputs files.
--
Tanu
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 39 [93%] [-4.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 252 [99%] [-0.60dB]
Front Right: Playback 252 [99%] [-0.60dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 20 [65%] [-4.50dB] [on]
Front Right: Playback 20 [65%] [-4.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 18
Mono: Playback 0 [0%] [-15.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 15 [48%] [6.00dB] [on]
Front Right: Capture 15 [48%] [6.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Independent HP',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [12.00dB]
Front Right: 1 [33%] [12.00dB]
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Contador de uso: 0
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices
and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino
aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0
session_manager=local/ceibal:@/tmp/.ICE-unix/1326,unix/ceibal:/tmp/.ICE-unix/1326
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 48000Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority:
9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo
analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: SUSPENDED
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 48000Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 16% 1: 16%
0: -47,06 dB 1: -47,06 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 0 usec, configurado 0 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900)
analog-input-microphone: Micrófono (priority: 8700, not
available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #4
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1318"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #6
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as
10eb95cf0aaa3a4501147092587898494200000013260035"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"10eb95cf0aaa3a4501147092587898494200000013260035"
Cliente #7
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1536"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #8
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1536"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #11
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2082"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "skype"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
application.icon_name = "skype.png"
Cliente #12
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2161"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2045"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0,
sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1,
sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico
Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1,
sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida
(sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1
(HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency
offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority:
9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround,
output:hdmi-surround+input:analog-stereo
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 39 [93%] [-4.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 252 [99%] [-0.60dB]
Front Right: Playback 252 [99%] [-0.60dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 20 [65%] [-4.50dB] [on]
Front Right: Playback 20 [65%] [-4.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 18
Mono: Playback 0 [0%] [-15.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 11 [35%] [0.00dB] [on]
Front Right: Capture 11 [35%] [0.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Independent HP',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [24.00dB]
Front Right: 2 [67%] [24.00dB]
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Contador de uso: 0
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices
and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino
aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0
session_manager=local/ceibal:@/tmp/.ICE-unix/1326,unix/ceibal:/tmp/.ICE-unix/1326
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 44100Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority:
9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo
analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: SUSPENDED
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 20% 1: 20%
0: -41,40 dB 1: -41,40 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 0 usec, configurado 0 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900)
analog-input-microphone: Micrófono (priority: 8700, not
available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #4
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1318"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #6
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as
10eb95cf0aaa3a4501147092587898494200000013260035"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"10eb95cf0aaa3a4501147092587898494200000013260035"
Cliente #7
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1536"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #8
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1536"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #10
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2076"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2045"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0,
sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1,
sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico
Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1,
sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida
(sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1
(HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency
offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority:
9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround,
output:hdmi-surround+input:analog-stereo
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
