On 8/10/16 2:20 PM, Tanu Kaskinen wrote:
On Wed, 2016-08-10 at 13:05 -0300, Gustavo Duarte wrote:
Hi,
I did the test suggested, parecord worked, however pasuspender not.
I saw after run pasuspender, all the sound stop working, the input (mic)
and output (speaker).
So i repeat the test and got two pactl output as following:
1) Boot the laptop.
2) run parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo
test.wav
3) aplay test.wav, sounds was recorded, works fine.
4) Open gnome-settings, audio meter show activity.
So if you start parecord before opening the settings, it's working. But
if the first thing you do is to open the settings, then the audio meter
doesn't show any activity? What if you after boot record a bit with
parecord, but stop it before opening the sound settings, does the audio
meter show activity in that case?
Next I'd like to see "pactl list" output while the sound settings are
open, but there's no audio meter activity.
If the first thing I do after boot, is open settings, the audio metter
shows activity, as following:
1) Boot
2) Open gnome sound settings, audio meter show activity.
If the first thing I do after boot, is record with parecord, the record
work fine, and when open settings after that, audio meter show acrivity.
1) Boot
2) parecord
3) CTRL+C to close parecord
4) A WAV file is generated with sound recoreded.
5) Open gnome sound settings, audio meter show activity.
In order to get pactl list output while sound settings are open, and
there's no audio meter activity, i had to break sound as following:
1) Boot
2) Open Skype, call Echo / Sound Test Service.
3) Try record a msg.
4) No msg was hear.
5) Open Gnome sound settings, audio meter no show activity.
6) While sound settings is open, get output of pactl. (attach
after-break-setting-open.pactl)
7) Change the volume input level on Gnome setting, just a bit, and audio
meter start to showing activity.
8) While sound setting remain open, get output of pactl
(after-change-level-setting-open.pactl)
5) Run pactl list > without-pasuspender.pactl
6) Run pasuspender -- arecord --device=plughw:0 test1.wav
7) aplay test1.wav, sounds wasn't recorded.
8) Open gnome-settings, audio meters doesn't show activity.
9) Run pactl list > with-pasuspender.pactl
It's expected that nothing works while pasuspender is running. The
point of pasuspender was to stop pulseaudio from using the hardware
while arecord is using it. Without pasuspender, arecord might fail to
open the device if pulseaudio still has it open. If pulseaudio doesn't
have it open (pulseaudio will auto-suspend after five seconds of
inactivity), pulseaudio might get confused if it tries to open the
device while arecord is still running. With pasuspender, everything
happens in controlled fashion - pulseaudio will stop using the hardware
before arecord starts, and won't try to use it before arecord stops.
Anyway, if arecord didn't manage to record anything, then that
indicates that the system was in a state where alsa didn't produce any
audio, so not really a pulseaudio problem. Did arecord capture
anything, even silence? (If the file length is 44 bytes, that counts as
"nothing", because it's just the wav header).
After check again, and see the wav file size, I noticed, that arecord
worked. To may playback the wav I had to reboot, let me show you the
sequence.
1) boot
2) Run pasuspender -- arecord --device=plughw:0 test1.wav
3) CTRL+C, to close previous cmd.
4) aplay test1.wav. Nothing is hear.
5) ls test1.wav show 101662 bytes.
6) reboot
7) aplay tes1.wav, I can listen the audio recorded.
To verify that the mixer settings are fine, run "amixer -c0" while
recording with arecord unsuccessfully (of course, you can verify the
non-success only afterwards). Try not to change any volume settings,
and record with parecord and again run "amixer -c0" while recording. If
the parecord recording is successful, compare the two "amixer -c0"
outputs to see if there's any difference. If there's no difference, but
arecord doesn't work while parecord works, then the mixer settings have
nothing to do with the problem.
--
Tanu
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
In a short, doing this latest test, is clear that the thing is breaking
the sound is the Skype, the question is why, and why if change input
level volume, the problem is fixed ?
Any thought ?
thanks in advance.
Gustavo.
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Contador de uso: 1
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices
and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino
aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0
session_manager=local/ceibal:@/tmp/.ICE-unix/1329,unix/ceibal:/tmp/.ICE-unix/1329
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 48000Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority:
9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo
analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: RUNNING
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 48000Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 16% 1: 16%
0: -47,06 dB 1: -47,06 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 5706 usec, configurado 20000 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900)
analog-input-microphone: Micrófono (priority: 8700, not
available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Salida de origen #4
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 15
Destino: 1
Especificación de sample: float32le 1ch 25Hz
Mapa de canal: mono
Formato: pcm, format.sample_format = "\"float32le\"" format.rate =
"25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volumen: 0: 100%
0: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 0 usec
Método de resample: peaks
Propiedades:
application.id = "org.gnome.VolumeControl"
media.name = "Detección de picos"
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2206"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id =
"source-output-by-application-id:org.gnome.VolumeControl"
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #5
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as
1063913bea6d30d709147091778092346400000013290035"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"1063913bea6d30d709147091778092346400000013290035"
Cliente #6
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1324"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #7
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1478"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #9
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1478"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #14
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2123"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "skype"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
application.icon_name = "skype.png"
Cliente #15
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2206"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #16
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2216"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2033"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0,
sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1,
sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico
Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1,
sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida
(sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1
(HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency
offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority:
9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround,
output:hdmi-surround+input:analog-stereo
Módulo #0
Nombre: module-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "4.0"
Módulo #1
Nombre: module-stream-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "4.0"
Módulo #2
Nombre: module-card-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "4.0"
Módulo #3
Nombre: module-augment-properties
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "4.0"
Módulo #4
Nombre: module-switch-on-port-available
Argumento:
Contador de uso: n/d
Propiedades:
Módulo #5
Nombre: module-alsa-card
Argumento: device_id="0" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Contador de uso: 1
Propiedades:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "4.0"
Módulo #6
Nombre: module-udev-detect
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "4.0"
Módulo #7
Nombre: module-bluetooth-policy
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "4.0"
Módulo #8
Nombre: module-bluetooth-discover
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices
and load bluetooth audio drivers"
module.version = "4.0"
Módulo #9
Nombre: module-native-protocol-unix
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "4.0"
Módulo #10
Nombre: module-default-device-restore
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "4.0"
Módulo #11
Nombre: module-rescue-streams
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move their streams to the default sink/source"
module.version = "4.0"
Módulo #12
Nombre: module-always-sink
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Tenga siempre cargado al menos un destino
aunque sea uno nulo"
module.version = "4.0"
Módulo #13
Nombre: module-intended-roles
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
of intended roles of devices"
module.version = "4.0"
Módulo #14
Nombre: module-suspend-on-idle
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "4.0"
Módulo #15
Nombre: module-systemd-login
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "4.0"
Módulo #16
Nombre: module-position-event-sounds
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "4.0"
Módulo #17
Nombre: module-filter-heuristics
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "4.0"
Módulo #18
Nombre: module-filter-apply
Argumento:
Contador de uso: n/d
Propiedades:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "4.0"
Módulo #19
Nombre: module-x11-publish
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "4.0"
Módulo #20
Nombre: module-x11-bell
Argumento: display=:0 sample=bell.ogg
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 bell interceptor"
module.version = "4.0"
Módulo #21
Nombre: module-x11-cork-request
Argumento: display=:0
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "4.0"
Módulo #22
Nombre: module-x11-xsmp
Argumento: display=:0
session_manager=local/ceibal:@/tmp/.ICE-unix/1329,unix/ceibal:/tmp/.ICE-unix/1329
Contador de uso: n/d
Propiedades:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "4.0"
Destino #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de muestra: s16le 2ch 44100Hz
Asignación de canal: front-left,front-right
Módulo propietario: 5
Silencio: no
Volumen: 0: 82% 1: 82%
0: -5,03 dB 1: -5,03 dB
balance 0,00
Volumen base: 100%
0,00 dB
Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latencia: 0 usec, configurada 0 usec
Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-output-speaker: Altavoces (priority: 10000)
analog-output-headphones: Auriculares analógicos (priority:
9000, not available)
Puerto Activo: analog-output-speaker
Formatos:
pcm
Fuente #0
Estado: SUSPENDED
Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Descripción: Monitor of Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 44100Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 100% 1: 100%
0: 0,00 dB 1: 0,00 dB
balance 0,00
Volume Base: 100%
0,00 dB
Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
Latencia: 0 usec, configurado 0 useg
Banderas: DECIBEL_VOLUME LATENCY
Propiedades:
device.description = "Monitor of Audio Interno Estéreo
analógico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formatos:
pcm
Fuente #1
Estado: RUNNING
Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
Descripción: Audio Interno Estéreo analógico
Controlador: module-alsa-card.c
Especificación de la Muestra: s16le 2ch 48000Hz
Mapa del Canal: front-left,front-right
Módulo Dueño: 5
Mudo: no
Volume: 0: 20% 1: 20%
0: -41,40 dB 1: -41,40 dB
balance 0,00
Volume Base: 8%
-66,00 dB
Monitoreo del destino: n/d
Latencia: 3640 usec, configurado 76000 useg
Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Propiedades:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1802 Analog"
alsa.id = "VT1802 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "Audio Interno Estéreo analógico"
alsa.mixer_name = "VIA VT1802"
alsa.components = "HDA:11068446,15585471,00100000
HDA:80862882,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900)
analog-input-microphone: Micrófono (priority: 8700, not
available)
Puerto Activo: analog-input-microphone-internal
Formatos:
pcm
Salida de origen #4
Disco: protocol-native.c
Módulo propietario: 9
Cliente: 15
Destino: 1
Especificación de sample: float32le 1ch 25Hz
Mapa de canal: mono
Formato: pcm, format.sample_format = "\"float32le\"" format.rate =
"25" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volumen: 0: 100%
0: 0,00 dB
balance 0,00
Latencia de búfer: 0 usec
Latencia de destino: 4248 usec
Método de resample: peaks
Propiedades:
application.id = "org.gnome.VolumeControl"
media.name = "Detección de picos"
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2206"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
module-stream-restore.id =
"source-output-by-application-id:org.gnome.VolumeControl"
Cliente #0
Controlador: module-systemd-login.c
Módulo dueño: 15
Propiedades:
application.name = "Login Session c1"
systemd-login.session = "c1"
Cliente #5
Controlador: module-x11-xsmp.c
Módulo dueño: 22
Propiedades:
application.name = "XSMP Session on gnome-session as
1063913bea6d30d709147091778092346400000013290035"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"1063913bea6d30d709147091778092346400000013290035"
Cliente #6
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.8.6.1"
application.process.id = "1324"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-settings-daemon"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #7
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1478"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #9
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.10.4"
application.process.id = "1478"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #14
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2123"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "skype"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
application.icon_name = "skype.png"
Cliente #15
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "GNOME Volume Control Dialog"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.6.3"
application.process.id = "2206"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #17
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "gnome-control-center.real"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.icon_name = "multimedia-volume-control"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "2206"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-control-center.real"
application.language = "es_UY.UTF-8"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Cliente #18
Controlador: protocol-native.c
Módulo dueño: 9
Propiedades:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.process.id = "2337"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "pactl"
application.language = "es_UY.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Muestra #0
Nombre: bell-window-system
Especificaciones de la muestra: s16le 2ch 44100Hz
Mapa del canal: front-left,front-right
Volumen: (incorrecto)
(incorrecto)
balance 0,00
Duración: 0,1s
Tamaño: 24,0 KiB
Lazy: no
Nombre del archivo: n/d
Propiedades:
media.role = "event"
application.process.id = "2033"
application.name = "gnome-terminal"
event.description = "Evento de campana"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "28"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "es_UY.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "ceibal"
application.process.host = "ceibal"
application.process.binary = "gnome-shell"
application.process.machine_id =
"7fa399cd946674ed89a5c33856b0fa6b"
application.process.session_id = "c1"
Placa #0
Nombre: alsa_card.pci-0000_00_1b.0
Controlador: module-alsa-card.c
Módulo dueño: 5
Propiedades:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0f04"
device.product.name = "ValleyView High Definition Audio
Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Audio Interno"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Perfiles:
input:analog-stereo: Estéreo analógico Entrada (sinks: 0,
sources: 1, priority. 60)
output:analog-stereo: Estéreo analógico Salida (sinks: 1,
sources: 0, priority. 6000)
output:analog-stereo+input:analog-stereo: Estéreo Analógico
Dúplex (sinks: 1, sources: 1, priority. 6060)
output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1,
sources: 0, priority. 5400)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida
(sinks: 1, sources: 0, priority. 300)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1
(HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
off: Apagado (sinks: 0, sources: 0, priority. 0)
Perfil activo: output:analog-stereo+input:analog-stereo
Puertos:
analog-input-microphone-internal: Micrófono interno (priority:
8900, latency offset: 0 usec)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-input-microphone: Micrófono (priority: 8700, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-input-microphone"
Parte del perfil(es): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
analog-output-speaker: Altavoces (priority: 10000, latency
offset: 0 usec)
Propiedades:
device.icon_name = "audio-speakers"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Auriculares analógicos (priority:
9000, latency offset: 0 usec, not available)
Propiedades:
device.icon_name = "audio-headphones"
Parte del perfil(es): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Propiedades:
device.icon_name = "video-display"
Parte del perfil(es): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo, output:hdmi-surround,
output:hdmi-surround+input:analog-stereo
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
