Dear Arnold,

I would not be too sure about your diagnosis. I think Tony is quite right
when saying that the problem is due to QPlane. The Aurora+SH+Qplane+Qubide I
was trying to fix experienced the same identical problem with either a
completely different Qubide or by replacing the two chips with new ones.

Regards

Davide

-----Messaggio originale-----
Da: [email protected]
[mailto:[email protected]] Per conto di
[email protected]
Inviato: venerdì 13 novembre 2009 20.28
A: [email protected]
Oggetto: Re: [Ql-Users] aurora display

Hi,
       I believe my Qubide chips are not working as they should. At first I
copied my master floppy disk to improve matters and as things didn't improve
I assumed my master  disk was faulty; but I now realize my master floppy is
ok. Its the chips.
Where can I get replacement chips?

Arnold




________________________________
From: Tony Firshman <[email protected]>
To: [email protected]
Sent: Friday, 13 November, 2009 0:47:20
Subject: Re: [Ql-Users] aurora display

gdgqler wrote, On 12/11/09 11:04:
> 
> On 11 Nov 2009, at 15:47, [email protected] wrote:
> 
>>  When I remove Qubide everything works fine using the floppy  disk to
boot up.
>> when reconnect Qubide it starts normal routine but when it restart with
Smsq, it stops at the first dot of the initialization dot. I have another
hard disk and it is the same with that.
>> 
> 
> I too, had the stopping at one dot with Qubide in my Aurora , Qubide
SuperHermes setup. I took the machine to the QUANTA AGM plus workshop last
April and J. Southern very kindly cured the problem saying "loose
connections". Since then the machine has worked properly except that
sometimes it will stop at one dot for a day or so. But it will usually start
working again after that pause. Why?
Ah I remember.  I had similar problems when I used Qplane backplane. The
problem went away with Mplane.
I reckoned at the time it was a noise issue.
What backplane do you have Arnold?
Try a different arrangement of cards - maybe qubide nearer the QL, if you
are using Qplane.


Tony

-- QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
      [email protected]    http://firshman.co.uk Voice: +44(0)1442-828254
Fax: +44(0)1442-828255 Skype: tonyfirshman
  TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG

_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm



      
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm

_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm

Reply via email to