Dear Georg, I had slightly similar problems with a Aurora+SGC+Qubide QL of a friend of mine. I tried several solutions but the effective one is to
1) remove Qubide 2) switch on Aurora without qubide 3) insert Qubide 4) re-start QL 99% it works. The problem happens randomly. Sometimes everything works for weeks, sometimes it get stuck two or three times a week Best regards Davide -----Messaggio originale----- Da: [email protected] [mailto:[email protected]] Per conto di gdgqler Inviato: giovedì 12 novembre 2009 12.04 A: [email protected] Oggetto: Re: [Ql-Users] aurora display On 11 Nov 2009, at 15:47, [email protected] wrote: > When I remove Qubide everything works fine using the floppy disk to > boot up. > when reconnect Qubide it starts normal routine but when it restart > with Smsq, it stops at the first dot of the initialization dot. I have > another hard disk and it is the same with that. > I too, had the stopping at one dot with Qubide in my Aurora , Qubide SuperHermes setup. I took the machine to the QUANTA AGM plus workshop last April and J. Southern very kindly cured the problem saying "loose connections". Since then the machine has worked properly except that sometimes it will stop at one dot for a day or so. But it will usually start working again after that pause. Why? George _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
