Ok I can see now that I need a MegaSTE or a TT for VME cards. This makes me miss my working Q40 ..
On 12 August 2014 18:02, Ralf Reköndt <[email protected]> wrote: > Yes, it does. The STE and the TT both have a VME port. At the last meetings > in Eindhoven (Good old days...honestly missed) Jochen always had an STE with > a QVME Card. I have used my QVME card with a VME-Adaptor in my MegaST 4. > > On the other hand: I am sure, that SMSQ/E is still working for an ST(E)/TT > with QVME, but I think, only Wolfgang Lenerz can tell, if there is an > updated version for the software-only version for it. > > Cheers...Ralf > > From: "Michael Grunditz" > > > By the way,, > > Does a QVME card work in a STE? I am interested in getting one if it works. > > On 12 August 2014 17:28, Michael Grunditz <[email protected]> > wrote: >> >> The monochrome version. >> >> On 12 August 2014 17:17, Ralf Reköndt <[email protected]> wrote: >>> >>> As you said, having an STE, there only was the way of using the QVME >>> Card. >>> What have you used up until now? The monochrome software-only version or >>> do >>> you have an QVME? >>> >>> Cheers...Ralf >>> >>> ----- Original Message ----- From: "Michael Grunditz" >>> >>> >>>> Derek, >>>> >>>> Thats what I do now with a ancient SMSQ/E. But most "modern" programs >>>> needs GD2, thats why I want to upgrade. >>>> >>>> On 12 August 2014 15:35, Derek Stewart <[email protected]> wrote: >>>>> >>>>> >>>>> Hi Michael, >>>>> >>>>> The only Atari ST QL Emulator software I have work with added hardware >>>>> to >>>>> the Atari, that is; Atari STFM, STF, Mega ST >>>>> >>>>> QVME board is added to the Atari TT, STE VME bus >>>>> >>>>> From Jochen Merz's web site: >>>>> >>>>> SMSQ/E emulates the display in the monochrome 640x400, because this is >>>>> the >>>>> only resolution which is greater or equal to the QL's 512x256. You can >>>>> use >>>>> the full resolution, even from BASIC. If you require higher resolutions >>>>> or >>>>> even higher compatibility, you can use extra hardware which will >>>>> generate >>>>> the original QL display organisation in hardware: >>>>> >>>>> Original QL-Emulator for the ATARI: only for ST and Mega ST, requires >>>>> the >>>>> ZX8301 display chip of the QL. Emulates 512x256 in 4 colours and >>>>> 256x256 >>>>> in >>>>> 8 colours. >>>>> >>>>> Extended QL-Emulator: only for ST and Mega ST. Does not require the >>>>> ZX8301 >>>>> and gives 512x256 in 4 colours and 768x280 pixels in 4 colours. Can >>>>> still >>>>> be >>>>> connected to original QL monitors. >>>>> >>>>> QVME: plugs into the VME bus of the Mega STE and TT. Fully programmable >>>>> 4 >>>>> colour modes from 512x256 up to 1280x900 in multiples of 8 pixels. >>>>> Horizontal and vertical frequencies are programmable too! >>>>> >>>>> --- >>>>> >>>>> So I guess you could run monochrome 640x400 on the Atari STE in High >>>>> Resolution mode. >>>>> >>>>> Regards, >>>>> >>>>> Derek >>>>> >>>>> >>>>> On 12/08/14 14:12, Michael Grunditz wrote: >>>>>> >>>>>> >>>>>> >>>>>> Derek, >>>>>> >>>>>> I am using a standard 520STe with 4M ram. >>>>>> >>>>>> On 12 August 2014 14:41, Derek Stewart <[email protected]> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> HI Michael, >>>>>>> >>>>>>> I have a couple of Atari machines, but not used them in a long time. >>>>>>> >>>>>>> I have some QL Emulator disks for the Atari ST, I will see if I can >>>>>>> get >>>>>>> them >>>>>>> off the disks. >>>>>>> >>>>>>> What version of emulator hardware do you have. >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Derek >>>>>>> >>>>>>> >>>>>>> On 12/08/14 09:53, Michael Grunditz wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Hi Derek, >>>>>>>> >>>>>>>> The problem with the Atari platform is that no recent versions of >>>>>>>> SMSQ/E works. Does anyone have a binary of the oldest version with >>>>>>>> GD2? >>>>>>>> >>>>>>>> Michael >>>>>>>> >>>>>>>> On 12 August 2014 10:40, Derek Stewart <[email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Michael, >>>>>>>>> >>>>>>>>> There is Menuconfig and Config on Dilwyn's Web site for download. >>>>>>>>> >>>>>>>>> The Atari SMSQ/E has PTR_GEN, WMAN, HOT-REXT built into SMSQ/E. So >>>>>>>>> you >>>>>>>>> can >>>>>>>>> not load in a new version of the PTR_GEN. >>>>>>>>> >>>>>>>>> An updated version of SMSQ/E from the SMSQ/E web site is required. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Derek >>>>>>>>> >>>>>>>>> >>>>>>>>> On 11/08/14 20:05, Michael Grunditz wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 11 August 2014 18:49, gdgqler <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 11 Aug 2014, at 16:03, Michael Grunditz >>>>>>>>>>> <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> I am looking for a config tool , menuconfig or the pointer >>>>>>>>>>>> version. >>>>>>>>>>>> I >>>>>>>>>>>> can't even find the plain config program. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> You could try uconfig from my website gwiltprogs.info. uconfig >>>>>>>>>>> produces >>>>>>>>>>> config blocks for BASIC, C and assembler. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thank you , the "config" program included works. >>>>>>>>>> I am fighting Atari SMSQ/E again , and thought that I might >>>>>>>>>> configure >>>>>>>>>> the binary. >>>>>>>>>> It is a PRG file so I think it shouldn't work and it doesn't. >>>>>>>>>> >>>>>>>>>> I have also tried to lrespr in a new ptr_gen in order to load a >>>>>>>>>> 2.x >>>>>>>>>> wman. No luck , it seems like I cannot load a new ptr_gen over the >>>>>>>>>> existing one in SMSQ. >>>>>>>>>> _______________________________________________ >>>>>>>>>> QL-Users Mailing List >>>>>>>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> QL-Users Mailing List >>>>>>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> QL-Users Mailing List >>>>>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> QL-Users Mailing List >>>>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> QL-Users Mailing List >>>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>>>> >>>>> _______________________________________________ >>>>> QL-Users Mailing List >>>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>>> >>>> >>>> _______________________________________________ >>>> QL-Users Mailing List >>>> http://www.q-v-d.demon.co.uk/smsqe.htm >>> >>> >>> >>> _______________________________________________ >>> QL-Users Mailing List >>> http://www.q-v-d.demon.co.uk/smsqe.htm > > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
