Hi Franklin, two other pages:
http://wiki.ubuntuusers.de/Garmin_eTrex_Serie This should also happen with your GPS, as you can read here: http://freie-software.blogspot.de/2008/08/opensuse-11-garmin-gpsmap-60csx-und.html Regards Josef Am 21.06.2014 12:29, schrieb Franklin van de Vossenberg: > Hi Josef, > > Thanks for your response. > > When QLGT is installed via softwarecenter the Garmin drivers are > installed also. > > Nevertheless I flushed the complete driver installation and > 're-installed it again whit the same result. Also removing the config > file (suggested in some old thread) did not resolve the problem. > > I also tried root privilege (which is needed without the udev rule). But > I have the same problem. > > Later today I will try the ppa which was suggested in the link you send > me. Previously I was using an very old ppa, but this was not updated > since ages. > > Thanks for the help. When I have tried the other ppa I will post the > results. > > Thanks, Franklin > > Op 21 jun. 2014 07:09 schreef "Josef Latt" <[email protected] > <mailto:[email protected]>>: > > Hi, > > Am 20.06.2014 23:08, schrieb Franklin: > > Hi All, > > > > Recently I installed 14.04 and with it QLGT. > > Due to issues I had to reinstall the from scratch again, and now > QLGT is > > not able to download or upload information to my GPSMAP60csx. > > > > I've installed QLGT 1.7.5 via the software centre. > > > > While I want to try and retrieve some waypoints from my GPS the > > following error pops up. > > "/Failed to download waypoints. Failed to sync. up with device. > Product > > request failed."/ > > > > My GPS bleeps twice, and that's it. > > > > Running QLGT in debug mode does not show much more information (I can > > post it if you need it). > > > > In syslog the following information is logged which strikes a > little bit > > odd. > > > > kernel: [23423.988971] usb 3-1: reset full-speed USB device number 15 > > using xhci_hcd > > kernel: [23424.005507] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint > > called with disabled ep ffff8801aa563e40 > > kernel: [23424.005510] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint > > called with disabled ep ffff8801aa563e80 > > kernel: [23424.005511] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint > > called with disabled ep ffff8801aa563ec > > > > The device seems to be reset, but why. > > > > Has anyone any idea's on this. > > Is the packgae qlandkartegt-garmin installed. > > And look here: > http://wiki.ubuntuusers.de/QLandkarteGT?highlight=qlandkarte > > Regards > > > ------------------------------------------------------------------------------ > HPCC Systems Open Source Big Data Platform from LexisNexis Risk > Solutions > Find What Matters Most in Your Big Data with HPCC Systems > Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. > Leverages Graph Analysis for Fast Processing & Easy Data Exploration > http://p.sf.net/sfu/hpccsystems > _______________________________________________ > Qlandkartegt-users mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users > ------------------------------------------------------------------------------ HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ Qlandkartegt-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
