Rajesh,
You may still be able to accomplish this the way I suggested since the
submission port requires authentication and the smtp port does not. Look
at the supervise scripts below. Notice the variable REQUIRE_AUTH=0/1 in
each file. Other's input would be helpful...anyone?
EricB
SMTP:
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
SPAMDYKE="/usr/bin/spamdyke"
SPAMDYKE_CONF="/etc/spamdyke/spamdyke.conf"
SMTPD="/var/qmail/bin/qmail-smtpd"
TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb"
HOSTNAME=`hostname`
VCHKPW="/home/vpopmail/bin/vchkpw"
REQUIRE_AUTH=0
exec /usr/bin/softlimit -m 64000000 \
/usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \
-u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \
$SPAMDYKE --config-file $SPAMDYKE_CONF \
$SMTPD $VCHKPW /bin/true 2>&1
SUBMISSION:
#!/bin/sh
QMAILDUID=`id -u vpopmail`
NOFILESGID=`id -g vpopmail`
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming`
SMTPD="/var/qmail/bin/qmail-smtpd"
TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb"
HOSTNAME=`hostname`
VCHKPW="/home/vpopmail/bin/vchkpw"
export REQUIRE_AUTH=1
exec /usr/bin/softlimit -m 3000000000 \
/usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \
-u "$QMAILDUID" -g "$NOFILESGID" 0 587 \
$SMTPD $VCHKPW /bin/true 2>&1
On 10/12/2015 11:48 AM, Eric Broch wrote:
> Rajesh,
>
> You're right. Maybe I was a bit hasty. I wouldn't streamline the file
> as much as I indicated, you wouldn't want an open relay on 587. I
> would remove the line QMAILQUEUE=.../simscan and see if that helps. I
> think you can simply remove it. Maybe someone else can chime in.
>
> Eric
>
>
> On 10/12/2015 11:05 AM, Rajesh M wrote:
>> eric
>>
>> had a few questions
>>
>> :allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private",RBLSMTPD="",NOP0FCHECK="1"
>> RELAYCLIENT="" -- are we disabling smtp authentication here ?
>> DKSIGN="/var/qmail/control/domainkeys/%/private" -- i dont use that
>>
>> i have disabled domainkeys
>> i had carried out the following steps
>> cd /var/qmail/bin
>> ln -sf qmail-queue.orig qmail-queue
>>
>> ... so do i need the above line ?
>>
>> RBLSMTPD="" --- i am using spamdyke
>> what does this do ?
>>
>>
>> rajesh
>>
>>
>> ----- Original Message -----
>> From: Eric Broch [mailto:[email protected]]
>> To: [email protected]
>> Sent: Mon, 12 Oct 2015 10:49:42 -0600
>> Subject: Re: [qmailtoaster] urgent help required : qq soft reject
>>
>> Rajesh,
>>
>> I have to admit that there is not much help in the lists, or anywhere,
>> for that matter on this subject.
>> I would start by streamlining my tcp.smtp.587. What I would do is backup
>> the original file and create a new tcp.smtp.587 and add the following
>> line to the new file. Add options until the error reoccurs.
>> :allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private",RBLSMTPD="",NOP0FCHECK="1"
>>
>> EricB
>>
>> On 10/12/2015 9:30 AM, Rajesh M wrote:
>>> hi
>>>
>>> i have 0.98.6 version of clam
>>>
>>> i have 4 other servers with qmailtoaster and all are identical and running
>>> the same clam version.
>>>
>>> rajesh
>>>
>>> ----- Original Message -----
>>> From: Tony White [mailto:[email protected]]
>>> To: [email protected]
>>> Sent: Tue, 13 Oct 2015 02:25:46 +1100
>>> Subject: Re: [qmailtoaster] urgent help required : qq soft reject
>>>
>>> Hi Rajesh,
>>> Check you ClamAV logs to see if this is causing the error.
>>> Verify you have the latest version of ClamAV as 0.975-1.4.1
>>> had a bug when scanning.
>>>
>>>
>>> best wishes
>>> Tony White
>>>
>>> On 13/10/2015 02:20, Rajesh M wrote:
>>>
>>>> hi
>>>>
>>>> for the last 10 days we are facing random errors
>>>>
>>>> qmail-smtpd: qq soft reject (mail server temporarily rejected message
>>>> (#4.3.0))
>>>>
>>>> there is no load on the server and httpd for webmail, dovecot work
>>>> normally.
>>>>
>>>> no errors in clamd, spamassassin log files
>>>>
>>>> even if i disable clamd and spamassassin the error still comes up.
>>>>
>>>> error occurs in both smtp port and submission port (does not have
>>>> spamassassin scanning)
>>>>
>>>> rebooting server resolves the issue for a 3-4 hours and then again the
>>>> issue starts.
>>>>
>>>> tried repairing the queue using queue_repair.py -- some files are fixed
>>>> however issue is not solved.
>>>>
>>>> /var/qmail/simscan folder contains around 50 files -- mostly all old dates.
>>>>
>>>> memory limits are correctly set in smtp and submission run files
>>>>
>>>> issue starts with a few rejects initially and then becomes continuous.
>>>>
>>>> 1) what could be the possible causes for this ?
>>>>
>>>> 2) can network connectivity issues cause this error ?
>>>>
>>>> 3) i am using seperate tcp.smtp cdb files files for port 25 and port 587
>>>> namely
>>>>
>>>> tcp.smtp.cdb and tcp.smtp.587.cdb
>>>>
>>>> how can i disable simscan for submission port by changing tcp.smtp.587 file
>>>>
>>>> my current tcp.smtp.587 is as follows
>>>>
>>>> :allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_START="ALWAYS",CHKUSER_RCPT_FORMAT="0",CHKUSER_RCPT_MX="0",CHKUSER_SENDER_FORMAT="0",
>>>> CHKUSER_SENDER_MX="0",CHKUSER_RCPTLIMIT="150",CHKUSER_WRONGRCPTLIMIT="20",QMAILQUEUE="/var/qmail/bin/simscan",SENDER_NOCHECK="1",SPFBEHAVIOR="2",NOP0FCHECK="1"
>>>>
>>>>
>>>> thank you,
>>>> rajesh
>>>>
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: [email protected]
>>>> For additional commands, e-mail: [email protected]
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [email protected]
>>> For additional commands, e-mail: [email protected]
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>
