eric already set my tcp.smtp.587 file
RELAYCLIENT="" overrides smtp auth even though it is set in the submission/run file we are providing this facility to a couple of clients who have a static ip. i have separate tcp.smtp files for smtp port 25 and submission port 587 so that i can control the mail flow to each independently i have currently set the following in my tcp.smtp.587 file :allow,NOP0FCHECK="1" disabled chkuser and simscan i will revert with the details tomm -- it is almost midnight now here. rajesh ----- Original Message ----- From: Eric Broch [mailto:[email protected]] To: [email protected] Sent: Mon, 12 Oct 2015 12:01:06 -0600 Subject: Re: [qmailtoaster] urgent help required : qq soft reject Rajesh, You may still be able to accomplish this the way I suggested since the submission port requires authentication and the smtp port does not. Look at the supervise scripts below. Notice the variable REQUIRE_AUTH=0/1 in each file. Other's input would be helpful...anyone? EricB SMTP: #!/bin/sh QMAILDUID=`id -u vpopmail` NOFILESGID=`id -g vpopmail` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` SPAMDYKE="/usr/bin/spamdyke" SPAMDYKE_CONF="/etc/spamdyke/spamdyke.conf" SMTPD="/var/qmail/bin/qmail-smtpd" TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" HOSTNAME=`hostname` VCHKPW="/home/vpopmail/bin/vchkpw" REQUIRE_AUTH=0 exec /usr/bin/softlimit -m 64000000 \ /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ $SPAMDYKE --config-file $SPAMDYKE_CONF \ $SMTPD $VCHKPW /bin/true 2>&1 SUBMISSION: #!/bin/sh QMAILDUID=`id -u vpopmail` NOFILESGID=`id -g vpopmail` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` SMTPD="/var/qmail/bin/qmail-smtpd" TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" HOSTNAME=`hostname` VCHKPW="/home/vpopmail/bin/vchkpw" export REQUIRE_AUTH=1 exec /usr/bin/softlimit -m 3000000000 \ /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 587 \ $SMTPD $VCHKPW /bin/true 2>&1 On 10/12/2015 11:48 AM, Eric Broch wrote: > Rajesh, > > You're right. Maybe I was a bit hasty. I wouldn't streamline the file > as much as I indicated, you wouldn't want an open relay on 587. I > would remove the line QMAILQUEUE=.../simscan and see if that helps. I > think you can simply remove it. Maybe someone else can chime in. > > Eric > > > On 10/12/2015 11:05 AM, Rajesh M wrote: >> eric >> >> had a few questions >> >> :allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private",RBLSMTPD="",NOP0FCHECK="1" >> RELAYCLIENT="" -- are we disabling smtp authentication here ? >> DKSIGN="/var/qmail/control/domainkeys/%/private" -- i dont use that >> >> i have disabled domainkeys >> i had carried out the following steps >> cd /var/qmail/bin >> ln -sf qmail-queue.orig qmail-queue >> >> ... so do i need the above line ? >> >> RBLSMTPD="" --- i am using spamdyke >> what does this do ? >> >> >> rajesh >> >> >> ----- Original Message ----- >> From: Eric Broch [mailto:[email protected]] >> To: [email protected] >> Sent: Mon, 12 Oct 2015 10:49:42 -0600 >> Subject: Re: [qmailtoaster] urgent help required : qq soft reject >> >> Rajesh, >> >> I have to admit that there is not much help in the lists, or anywhere, >> for that matter on this subject. >> I would start by streamlining my tcp.smtp.587. What I would do is backup >> the original file and create a new tcp.smtp.587 and add the following >> line to the new file. Add options until the error reoccurs. >> :allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private",RBLSMTPD="",NOP0FCHECK="1" >> >> EricB >> >> On 10/12/2015 9:30 AM, Rajesh M wrote: >>> hi >>> >>> i have 0.98.6 version of clam >>> >>> i have 4 other servers with qmailtoaster and all are identical and running >>> the same clam version. >>> >>> rajesh >>> >>> ----- Original Message ----- >>> From: Tony White [mailto:[email protected]] >>> To: [email protected] >>> Sent: Tue, 13 Oct 2015 02:25:46 +1100 >>> Subject: Re: [qmailtoaster] urgent help required : qq soft reject >>> >>> Hi Rajesh, >>> Check you ClamAV logs to see if this is causing the error. >>> Verify you have the latest version of ClamAV as 0.975-1.4.1 >>> had a bug when scanning. >>> >>> >>> best wishes >>> Tony White >>> >>> On 13/10/2015 02:20, Rajesh M wrote: >>> >>>> hi >>>> >>>> for the last 10 days we are facing random errors >>>> >>>> qmail-smtpd: qq soft reject (mail server temporarily rejected message >>>> (#4.3.0)) >>>> >>>> there is no load on the server and httpd for webmail, dovecot work >>>> normally. >>>> >>>> no errors in clamd, spamassassin log files >>>> >>>> even if i disable clamd and spamassassin the error still comes up. >>>> >>>> error occurs in both smtp port and submission port (does not have >>>> spamassassin scanning) >>>> >>>> rebooting server resolves the issue for a 3-4 hours and then again the >>>> issue starts. >>>> >>>> tried repairing the queue using queue_repair.py -- some files are fixed >>>> however issue is not solved. >>>> >>>> /var/qmail/simscan folder contains around 50 files -- mostly all old dates. >>>> >>>> memory limits are correctly set in smtp and submission run files >>>> >>>> issue starts with a few rejects initially and then becomes continuous. >>>> >>>> 1) what could be the possible causes for this ? >>>> >>>> 2) can network connectivity issues cause this error ? >>>> >>>> 3) i am using seperate tcp.smtp cdb files files for port 25 and port 587 >>>> namely >>>> >>>> tcp.smtp.cdb and tcp.smtp.587.cdb >>>> >>>> how can i disable simscan for submission port by changing tcp.smtp.587 file >>>> >>>> my current tcp.smtp.587 is as follows >>>> >>>> :allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_START="ALWAYS",CHKUSER_RCPT_FORMAT="0",CHKUSER_RCPT_MX="0",CHKUSER_SENDER_FORMAT="0", >>>> CHKUSER_SENDER_MX="0",CHKUSER_RCPTLIMIT="150",CHKUSER_WRONGRCPTLIMIT="20",QMAILQUEUE="/var/qmail/bin/simscan",SENDER_NOCHECK="1",SPFBEHAVIOR="2",NOP0FCHECK="1" >>>> >>>> >>>> thank you, >>>> rajesh >>>> >>>> >>>> >>>> >>>> --------------------------------------------------------------------- >>>> To unsubscribe, e-mail: [email protected] >>>> For additional commands, e-mail: [email protected] >>> >>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: [email protected] >>> For additional commands, e-mail: [email protected] >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >
--------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
