I will post what they determine on Friday. What started it yesterday was locking in my van. Checked the bolt and v shaped thing on my chair and it’s tight as a drum. Chair has worked fine today but I didn’t go anywhere.
At least I just have to turn mine off/on to reset………taking battery boxes out is a chore! Nicki From: Bryce Willis [mailto:[email protected]] Sent: Sunday, June 26, 2016 3:47 PM To: [email protected] Subject: Fwd: [QUAD-L] Chair Problems Nikki, I have that very same chair and joystick.Five days ago it decided to do something similiar. When I turn it off, the screen freezes in the gear I was in. It won't turn off or go back in gear. I have to disengage the batteries and shove them in with some force to make it come back on. I too, am baffled. Sent from my iPad Begin forwarded message: Resent-From: [email protected] From: "nichole rohling" <[email protected]> Date: June 25, 2016 at 6:23:58 PM EDT To: <[email protected]> Subject: [QUAD-L] Chair Problems I have an Action Arrow Storm with a MK6I joystick. Over the past several weeks my chair is doing the following: sometimes when I lock in my EZ Lock the green line that says Driving will turn yellow and say “Low Battery” and won’t go until I turn it off/on then it will go……I have new batteries that are fully charged. The screen also appears to go dim and bright. It also will do it sometimes going over door thresholds after this happened a few times it quit while backing up the ramp into my van. Got same message several times so I finally turned around and went forward (that didn’t work though today, wouldn’t go forward or backward) It also will just quit moving and say Stopping on the green line and says Release JS – I’ll lose a bar or 2 bars then had full battery when I turned chair off/on A few times the screen turns red when hitting a bump and says batteries have no charge – chair won’t move, turn off/on and it goes, batteries show fully charged Now it has started occasionally only going a few inches, especially on any incline, some days it does fine. I had my brother check battery connections and he said they were tight, checked bolt on my chair for EZ Lock and it’s not loose, released motor locks and pulled them back up. Even unplugged wires going into motors and plugged them back in Any suggestions what else to check? I think it has to have something to do w/ battery connections somewhere but they can’t come until Friday to check it (been waiting for 3 weeks) Hoping one of you has had the same experience J My dearest friends daughter’s wedding is tonight and I can’t go because my chair is messing up Nicki
