I actually did remove the card completely when I tested it on the onboard video (and reseated it after) but I will look into rasterops configuration, thanks for the tip!
Cheers, Stephen On Sunday 09 May 2004 20:22, Tina Holm wrote: > At 19:09 -0500 09/05/04, Stephen Alexander wrote: > >I think I am going to give up on this one... > > You should at least try reseating the graphics card. > > Had an old Radius card way back, that required holding the "t" key > down to configure to the monitor and the Mac. > > Don't know if there's an obscure key combo for a RasterOps too. Might > be needed if it's been sitting with a dead battery for a while. > > As for extensions, I didn't need any for my 19 inch RasterOps with > the original RasterOps NuBus card attached to my Q800 running 7.5.3. > > BTW, bought an adapter when I moved on to my beige G, and am now > running the ancient RasterOps from an EasyColor 1600/16 PCI card. > System 9.2.1, still no extensions needed. -- Quadlist is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com