I have tried to upgrade , created the quadstor.conf and add parameter inside.
But problem remains. On Thursday, March 2, 2017 at 10:33:29 AM UTC+1, quadstor wrote: > > Moving forward the VTL will only support adding whole disks and not > partitions. The VTL does not do a good well in differentiating > partitions and whole disk and has cause other issues (for example > multipath disk detections). For SCSI disks (/dev/sdb /dev/sdc etc) it > should be ok. There is no real advantage in partitions in your case > since all of these belong to the same storage pool and the same can be > achieved by LVM. > > For the issue you are facing, > 1. Upgrade to 3.0.15 > 2. add the following to /quadstorvtl/etc/quadstor.conf (create the > file if not present) > EnableDiskPartitions=1 > 3. service start quadstorvtl (or restart the system) > > On Thu, Mar 2, 2017 at 2:34 PM, Francesco Oliva <[email protected] > <javascript:>> wrote: > > After upgrade the volumes are disappared. > > > > I can see only the devices (/dev/sdb & /dev/sdc) not the partitons . > > > > The server is a Dell 730 with perc controller , The Os is CentOs > 7.3.1611 . > > > > After rollback to 3.0.11 the system is working. > > > > See Screenshot pre & post upgrade , diag attached. > > > > Have a nice day . > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google > Groups > > "QUADStor VTL" group. > > To unsubscribe from this group and stop receiving emails from it, send > an > > email to [email protected] <javascript:>. > > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
