Can you send us the diagnostics and the /quadstorvtl/etc/quadstor.conf file
On Fri, Mar 3, 2017 at 3:15 PM, Francesco Oliva <[email protected]> wrote: > I have tried to upgrade , created the quadstor.conf and add parameter > inside. > > But problem remains. > > On Thursday, March 2, 2017 at 10:33:29 AM UTC+1, quadstor wrote: >> >> Moving forward the VTL will only support adding whole disks and not >> partitions. The VTL does not do a good well in differentiating >> partitions and whole disk and has cause other issues (for example >> multipath disk detections). For SCSI disks (/dev/sdb /dev/sdc etc) it >> should be ok. There is no real advantage in partitions in your case >> since all of these belong to the same storage pool and the same can be >> achieved by LVM. >> >> For the issue you are facing, >> 1. Upgrade to 3.0.15 >> 2. add the following to /quadstorvtl/etc/quadstor.conf (create the >> file if not present) >> EnableDiskPartitions=1 >> 3. service start quadstorvtl (or restart the system) >> >> On Thu, Mar 2, 2017 at 2:34 PM, Francesco Oliva <[email protected]> wrote: >> > After upgrade the volumes are disappared. >> > >> > I can see only the devices (/dev/sdb & /dev/sdc) not the partitons . >> > >> > The server is a Dell 730 with perc controller , The Os is CentOs >> > 7.3.1611 . >> > >> > After rollback to 3.0.11 the system is working. >> > >> > See Screenshot pre & post upgrade , diag attached. >> > >> > Have a nice day . >> > >> > >> > >> > >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "QUADStor VTL" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
