The config file parameter is read much later after the disk scan. We need to fix that.
As a temporary fix, does a rescan from "Physical Storage" help ? On Fri, Mar 3, 2017 at 3:43 PM, Francesco Oliva <[email protected]> wrote: > Sure. > > > > 2017-03-03 11:07 GMT+01:00 QUADStor VTL Support <[email protected]>: >> >> Can you send us the diagnostics and the /quadstorvtl/etc/quadstor.conf >> file >> >> On Fri, Mar 3, 2017 at 3:15 PM, Francesco Oliva <[email protected]> wrote: >> > I have tried to upgrade , created the quadstor.conf and add parameter >> > inside. >> > >> > But problem remains. >> > >> > On Thursday, March 2, 2017 at 10:33:29 AM UTC+1, quadstor wrote: >> >> >> >> Moving forward the VTL will only support adding whole disks and not >> >> partitions. The VTL does not do a good well in differentiating >> >> partitions and whole disk and has cause other issues (for example >> >> multipath disk detections). For SCSI disks (/dev/sdb /dev/sdc etc) it >> >> should be ok. There is no real advantage in partitions in your case >> >> since all of these belong to the same storage pool and the same can be >> >> achieved by LVM. >> >> >> >> For the issue you are facing, >> >> 1. Upgrade to 3.0.15 >> >> 2. add the following to /quadstorvtl/etc/quadstor.conf (create the >> >> file if not present) >> >> EnableDiskPartitions=1 >> >> 3. service start quadstorvtl (or restart the system) >> >> >> >> On Thu, Mar 2, 2017 at 2:34 PM, Francesco Oliva <[email protected]> >> >> wrote: >> >> > After upgrade the volumes are disappared. >> >> > >> >> > I can see only the devices (/dev/sdb & /dev/sdc) not the partitons . >> >> > >> >> > The server is a Dell 730 with perc controller , The Os is CentOs >> >> > 7.3.1611 . >> >> > >> >> > After rollback to 3.0.11 the system is working. >> >> > >> >> > See Screenshot pre & post upgrade , diag attached. >> >> > >> >> > Have a nice day . >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > -- >> >> > You received this message because you are subscribed to the Google >> >> > Groups >> >> > "QUADStor VTL" group. >> >> > To unsubscribe from this group and stop receiving emails from it, >> >> > send >> >> > an >> >> > email to [email protected]. >> >> > For more options, visit https://groups.google.com/d/optout. >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "QUADStor VTL" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "QUADStor VTL" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/quadstor-vtl/Uh7ZbPuW9cY/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "QUADStor VTL" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
