The old GTX used to be 20-50 which is too thick for CVH's Jim
robert greig wrote: > Hello. > > I have always used Castrol GTX. 10-40 I think. > > Never had any oil problems. > > Robert Greig. > > > > ----- Original Message ---- > From: Bob Craig <[email protected]> > To: Quantum Owners Group <[email protected]> > Sent: Thursday, 14 May, 2009 8:09:28 > Subject: [Quantum Owners] Re: CVH pre/post 86 changes > > > What pressure was your gauge showing. Haynes says the min should be 14 > thingys (thats the technical description). If your oil is quite old, > it could be thinning out when warm. Coincidentally, mine has started > doing the same after fitting the DCNFs but the oil definately needs > changed, so I'll be doing that first. Go for a good quality oil but > not a really high spec synthetic for modern cars. I dont think the > hyrdraulic tappets like it. > > As a matter of interest, what oil do other people use? > > Bob Craig (Q2-267) > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
