On Jun 24, 9:51 am, Jim Hearne <[email protected]> wrote:
> The Silver top Zetec is certainly as you describe, no positive location,
> just clamped on a taper with the centre bolt.
> I thought the black tops were the same but i've not taken one off so
> can't be sure.
>
> Does the kit come with Vernier pulleys ?, maybe it's a mod to work with
> those.
>
> Jim
>
>
>
No verniers in the kit, but the same thought had crossed my mind.
It's supposed to be a straight bolt-in conversion, using standard
valves, springs etc.
I did ask the guy from Cat Cams who phoned me whether I had to buy
anything else.
He said no although a new cam belt was advised on the grounds that
you're not supposed to refit a used belt.
Anyway, I've uploaded a pic of it into the files area, called Zetec
CAT CAM.jpg
For some reason Google Groups won't let me delete or rename my first
attempt at uploading, called CIMG0659.
Apparently there may be a permission problem somewhere.
TonyV.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners
Club nor the individuals associated with the Quantum Owners Club or in the
preparation of the above information shall have any liability to any person or
entity with respect to liability, loss, or damage caused or alleged to be
caused directly or indirectly by the instructions contained within this or
related message(s).
-~----------~----~----~----~------~----~------~--~---
