Distributorless.

Cps all connected up, power to the coil but no spark. Although the Ht
leads do not feel that great of a fit, so i will pay closer attention
to those.

Narrowed it down to either a faulty coil pack or edis unit.

"If ECU is powered then look for the tacho needle jumping alittle
during cranking. If yes, then coil pack has failed"

The rev counter moves slightly which lead me to believe that the coil
pack is nackerd, ive tried two seperate used ones so will probably
need to get a new one.

It may also be the edis unit so i might just get both and try the
combination.

I will trace back the cps wires anyway as they are easy to do and
seperate, check for splits etc.

Thanks



On Sep 16, 9:20 pm, "Susan and Martin Scott"
<[email protected]> wrote:
> Is this a car with no distributor/rotor arm? This modern stuff is more
> complex! As Andy says, the CPS may be the prob if you've no spark from the
> coil.
>
> ----- Original Message -----
> From: "Andy Haworth" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, September 16, 2009 9:07 PM
> Subject: [Quantum Owners] Re: no spark
>
> Mine did this. I hadnt connected the crank position sensor....
>
> On Wed, Sep 16, 2009 at 9:03 PM, Susan and Martin Scott
> <[email protected]> wrote:
>
> > I'd suspect the brand-new ht leads then! Firstly is there a spark to the
> > king lead? If there is no spark to any plugs, then go back to the king
> > lead,
> > distributor cap, Rotor arm (guess you refitted it! - easily forgotten),
> > and
> > just keep going back ie coil next etc. From past bitter experience the
> > 'super silicone' type leaqds don't match up to the standard manufacurers
> > offerings, either on performance or price.
> > ----- Original Message -----
> > From: "Arn1905" <[email protected]>
> > To: "Quantum Owners Group" <[email protected]>
> > Sent: Wednesday, September 16, 2009 6:42 PM
> > Subject: [Quantum Owners] no spark
>
> > Pretty much finished the Frst conversion on the 2+2, went to start it
> > up but there is no spark.
> > Brand new ht leads and plugs.
>
> > Is there anything i can test/try before i start tracing back all of
> > the wiring?
>
> > Thanks
>
> > Arnie
--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to