The edis module should generate a spark independently of the ecu. It only needs the the signal from the CPS and power for it to start making sparks. I think the power to the Edis module is separate to that for the coil pack so check for that as well, also that the edis module is earthed.
Does the fuel pump prime when you turn the ignition on ? Jim Arn1905 wrote: > Pretty much finished the Frst conversion on the 2+2, went to start it > up but there is no spark. > Brand new ht leads and plugs. > > Is there anything i can test/try before i start tracing back all of > the wiring? > > Thanks > > > Arnie > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
