In message <b20f5d6d678647a681484d157ab30...@study>, Andy Heaton
<[email protected]> writes
Tony.
As you look from the front of the engine on the inner wing just below
the Engine mount, its that rail that is cut back and re glassed over.
The intercooler is in the nose cone alongside the rad (escort). My fuel
tank does have a swirl pot.
Andy.
Thanks Andy, it sounds like the body mods are not that bad to do.
Moving the intercooler shouldn't be too bad either; just a case of
running some decent bore piping around the bay.
I'll keep a watch on ebay for an ERST alloy rad. Got to be a better bet
than the glued-together affairs that everybody seems to supply nowadays.
Thanks to John, too, for the pictures. Most helpful.
--
Tony Vincent
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
