Thanks for the responses: I have gone through the carbs and have a note of all the jets (but I have left it at work!) However, I remember thinking the jetting was more akin to 1800cc not 2000cc engine. I can let you know tomorrow, but if you can send me the jetting programme that would be very helpful.
The only jet sizes I do have to hand are F16- 125 on main jets and 45- F9 idle jets on 34mm chokes, but I cannot remember. The main thing I want to do for now is get the engine running to an IVA acceptable standard and worry about correct setting up later. regards, Ian Mac On Apr 14, 9:44 pm, Ian Harrison <[email protected]> wrote: > Ian, 2.5 turns is 360 degrees two and a half times. > > > > What idle jets do you have in and what size choke are you on? > > I have a copy of a jetting program I can mail you off list if it would help. > > Ian > > Sent from my iPad > > On 14 Apr 2011, at 21:24, Steve Kodz <[email protected]> wrote: > > > -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
