I had the same problem with mine and got an allen grub screw nipple to fit. I have had no problems in nearly four years. I think I got it from MNR.
https://picasaweb.google.com/lh/photo/n3C63vYdvbjTFa4U5e5W1A?feat=directlink Ian On Apr 20, 8:11 am, Doug <[email protected]> wrote: > Hi Ian, > > Ooh so close. Don't be downheartened. Should be a doddle to fix. > From memory my handbrake cable is secured with an inch long half inch > AF hexagonal steel bar with a hole down the middle big enough for two > cables to pass through (down and back), and has 2 M5 threaded holes > each with a M5x8 cap screw in which clamp the cable inside. Has held > so far. Not sure if that's what came in the kit or I made it myself. > > Is it S3-059 your IVAing? If so that must be one of the longest > builds in history! > > My S3-090 was SVA'd in 2005, and I took 2 years in building it. Sadly > it will be for sale at Stoneleigh. Just tidying it up a bit in > preparation. > > Hope you're up and running and we'll see yours there too. > > Doug -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
