hi all firstly let me all wish you a happy new year for when it happens have a good one.
onto my question i took this pic as i was going to ask why the pedal shaft was jamming and sat to one side on the through hole in the bulkhead [IMG]http://i120.photobucket.com/albums/o192/jindal/DSC02339.jpg[/IMG] couldn't work it out as everything seemed to line up in front and behind the bulkhead but the pedal push rod was pulling the tranfer bar to one side then it dawned on me that the R clip and bush may have been fitted (all along) in the wrong place, so my question is, is this now the correct orientation of the pin / bush setup? http://i120.photobucket.com/albums/o192/jindal/DSC02341.jpg ive set it to how i think it should be? http://i120.photobucket.com/albums/o192/jindal/DSC02343.jpg certainly looks and feels better also started making a template to make a stainless panel to hose all the grommets and reinforce the bulkhead as some of the fittings have dished the fiberglass http://i120.photobucket.com/albums/o192/jindal/DSC02344.jpg thankyou in advance -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
