Someone (Kent Trim Supplies?) used to sell grommets suitable for 6mm thick
panels at the car shows - a very useful item (twice the price of regular
grommets), but worth the added expense for the agro saved. There are some
larger grommets available (eg 1.5" dia) (from Auto Sparks?) which will fit a
thick panel as well.
----- Original Message -----
From: "Jim Hearne" <[email protected]>
To: <[email protected]>
Sent: Saturday, December 31, 2011 7:06 PM
Subject: Re: [Quantum Owners] brake bar question
I actually made up a stainless plate that filled the entire gap on the
top section of the bulkhead from side to side and down to behind the
smaller spaceframe tube.
This let me mount most of the standard bulkhead grommets into it instead
of cutting and gluing them.
You may need to open out the hole in the bulkhead behind a little to
clear the rear edge of the flange on the grommet.
I also brazed a replacement clutch cable tube directly onto the plate.
For the grommets that are in other areas of the bulkhead you can make
smaller localise plates to mount the grommets into.
I also made up a sleeve with a flange on it the fix the end of the
heater tube onto the bulkhead.
Jim
>also started making a template to make a stainless panel to hose all
the grommets and reinforce the bulkhead as some of the fittings have
dished the fiberglass
http://i120.photobucket.com/albums/o192/jindal/DSC02344.jpg thankyou in
advance
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1416 / Virus Database: 2109/4114 - Release Date: 12/31/11
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
