what's the chassis Q... or reg  M254... ???
Looking to hear news of our old one.

Aside from that what suspension is on the car now? standard looking units, cut off springs? Adjustable (i guess not) our 195 15 somethings did rub the arches but only on the tyre wall. I did change the suspension for new 1.1 springs and monroe gas struts but it still rubbed. was only noticeable after changing the tyres, I did not get round to replacing bushes but what effect this would of had i dont know. - Jim - what internals do genuine fords have? i think one of mine was leaking oil.
Based on that look at oil replacements.
Caution on the front struts as MK3.5 1.6 Si have a larger bore strut than the Mk3 Purple Polyurethane bushes tighten up the handling no end, the whole handling was fine in my view for every day fun spirited driving.

Qless
Gary

On 10/06/2012 15:48, Andrewow47 wrote:
Hi I have recently purchased an H4 and will shortly be joining the
owners club.

My question concerns suspension wheels and tyres.

The car has a 1.6 zetec engine and is based on a 1995 Fiesta so guess
this is a Fiesta Mk3.5 but I am not sure.

The tyre size is 16/215/40 which just seems too wide for the car, they
are virtually projecting beyond the wheel arches and the rears rub the
arches over bumps.

I don't know what the suspension set is but the front ride height
seems on the high side and the rear is a bit low and the rear
suspension seems firm to say the least! In fact it really is spoiling
the car on normal roads, on the plus side it corners like a go-kart.

I have read that the 'factory set up' was standard 1.6 Fiesta
suspension on the front and 1.1 on the rear, I have do to something to
improve the suspension as a matter of priority,I was thinking about
just buying some standard 1.1 springs/shocks for the rear and taking
it from there.

There are also a fair number of alternative suspension manufacturers
such a spax, koni etc. who sell lower/stiffer/adjustable alternatives
and I don't know if this would be better?

Also any guidance on wheel sizes/offsets and tyre sizes would be very
much appreciated.


--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).

Reply via email to