Hi, can anyone please advise on the following? I would like to mount a couple of 12" speakers into the upright section of where the rear seats would normally be in my 2+2. The holes for the speakers would be circular in shape and therefore have no square edges, (which would tend to introduce points of stress and potential crack propagation points).
My question is, would cutting these two holes adversely affect the structural rigidity of the body shell. If so, if I were to put some strengthening braces on the inside (in the space between the boot and the cabin) would this be sufficient to retain the rigidity of the shell. Many thanks for any help. Cheers, Keith -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
