i have a couple different alternator mounts one with only two bolt holes and one with four bolt holes (the bolt holes that bolt the bracket to the engine). do any of these sound right.
On Saturday, 20 August 2016 21:00:44 UTC+1, john beckett wrote: > > I must be doing something wrong as I've just put the 1600 cvh engine back > into my quantum and I can't figure out this alternator. I can get the > alternator in fitted but I can't get the belt to tension as the alternator > hits on the stabilizer bar mounting thing that bolts to the frame at the > bottom. The belt looks really short but can I get a shorter one. Not sure > what to do. Do any of you guys have the measurement for how long the belt > should be. > > Thanks -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
