Yes, the 2+2 will be at Stoneleigh. At your disposal to measure everything you want! But only if the (14") wheels are ready from the paintshop and some tyres fitted! Gonna be last minute...fingers crossed!
Tonight I measured just under 20mm drivers side between wheelrim and trailingarm and about 15mm on the passengers side. Under load, this will be even more centered. This is measured with 6,5 J rims of 15" ET 38 fitted with 195-45-15 and 5mm spacers, so low profile and therefore not really exceeding the rim. Spacers not really needed, but fills the arches better. (the Focus got new Dunlops last year (195-60-15), and indeed these were more rim-protecting than the ones on before.) The space between the shock and tyre is, curiously enough, the same as mentioned above. Remember it is only now the axle is put central; these measurements were way off in the past! It seems more quantums need this checked. The saloon is not at my home, so sorry not to have the opportunaty to take measurements. As it runs wider wheels, presumably the axle is well positioned. On the front it has more room to turn than on the 2+2, these wider wheels rubbing the inner wing on full lock and also the scuttle full lock otherway around. No problem on the saloon. Will exchange numbers at Stoneleigh so you can have a look at the pics. (Or pass your mobilenr to Michael Huges, he has my details and is near you.) Any use all these details? Grtz Rolf -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
