Hi, Julian, Which engine do you have and on which side is the mounting in question?
I have an H4i with the 1.6 Zetec engine, a unit that had been installed, before I bought the car, to replace an earlier 1.6 engine in order to offer power steering. Unfortunately, the engine was put in by goblins using hammers; it was a tight fit and, I discovered on taking a sharp left-hand bend, lacked an engine mount on the near side connecting the engine to the chassis, resulting in a very alarming noise as an exposed pulley came into contact with the lower chassis member and tried to chew its way through it. I obtained the correct engine mounting in good condition from a scrapped MkIII Fiesta but never got around to fitting it before garaging the car with a view to sorting out a number of small problems pre-MoT test. That was three years ago! Consequently, I'm now the owner of a pre-barn-find blue Quantum H4i, a treasure trove of spare parts such as full light sets (time two, since an earlier MkIII was stripped to feed it and that had all lights intact as well), new and unfitted front wishbones, new front and rear shocks (rear fitted, never used, front in box) . . . A real boys' Christmas morning of delights! If the engine mount might be of interest, let me know. If the rest of the car has appeal, I might be open to offers (since I'd really not like it to go for cannibalisation to feed a Fiesta MkIII). Cheers! On Sunday, 21 July 2019 08:43:11 UTC+1, julian wrote: > > Hi > > The H4 has a stabilising bar from the chassis frame to the top of the > engine. It has just given up. I thought I'd just check to see if there was > a chance replacements might be available before having this remade. > > The bushes are showing their age but not yet scrap. So I'd be interested > in replacing the whole lot if that is possible. > > A vain hope I suspect, but worth a shot. > > Thanks > > Incidentally the hoses in my H4 were pretty poor and some bodged. A full > correct correct set was no longer available, one of the most complex shapes > being essentially custom. I had that one properly sorted so the moulds now > exist for it which makes it possible to source a complete set if anyone is > interested. > > > Julian Coleman > City Audio Services > > > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/ca0e555e-cb5b-4ff2-93db-75b0530d9387%40googlegroups.com.
