On Mon, December 25, 2017 2:24 pm, Blooorp wrote: > Le lundi 25 décembre 2017 15:11:51 UTC+1, awokd a écrit : > >> On Mon, December 25, 2017 1:47 pm, Blooorp wrote: >> >>> Le lundi 25 décembre 2017 14:39:45 UTC+1, awokd a écrit : >>> >>> >>>> On Mon, December 25, 2017 12:35 pm, Blooorp wrote: >>>> >>>> >>>>> Hey, I'm having some heavy trouble getting coreboot on my G505s, >>>>> could you take a look at how I did it to see if you spot any >>>>> difference compared to how you did it? >>>>> >>>>> Here is how I built, flashed and tested it : >>>>> https://ghostbin.com/paste/wprhk >>>>> >>>>> >>>> >>>> They seem to block Tor users. I can take a look if you put it on >>>> pastebin.com for example. >>> >>> Coreboot Lenovo G505s - Build/Flash/Test >>> https://pastebin.com/58K4VGgf >>> Full make output https://pastebin.com/nAPbNjJG >>> >> >> I think you are very close to having it working, probably only the >> video. >> >> Try the following options in your menuconfig: >> General/Use CMOS for configuration values >> General/Allow use of binary-only repository >> Chipset/Add imc firmware (don't specify location or IDs, let it >> auto-populate) Chipset/SATA Mode 2 (don't specify location or IDs, let it >> auto-populate) Devices/Add a VGA BIOS image (don't specify location or >> IDs, let it >> auto-populate) Payload/SeaBIOS 1.11.0 >> >> >> And to keep this on topic for the Qubes Users mailing list, if you plan >> on running Qubes 4.0 on there, you'll also want this Coreboot patch >> currently waiting on code review: >> https://review.coreboot.org/#/c/coreboot/+/22843 . >> > > I do plan on running Qubes 4.0, how to I actually patch coreboot before > the build?
See the changes I made in that link to those two files, and copy and paste them into your own source files manually. If you don't trust the blob I provided (and you shouldn't!) perform the following steps to verify it: Executing the following on a Debian Stretch install: dd skip=5284 iflag=skip_bytes if=/lib/firmware/amd-ucode/microcode_amd_fam15h.bin of=amd.bin xxd -i amd.bin Then copying and pasting. Executing these steps against coreboot/3rdparty/blobs/cpu/amd/family_15h/microcode_amd_fam15h.bin provides identical results. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/537cb1d917b78ea166d54b2eeda83dac.squirrel%40tt3j2x4k5ycaa5zt.onion. For more options, visit https://groups.google.com/d/optout.