Le lundi 25 décembre 2017 15:50:33 UTC+1, awokd a écrit : > On Mon, December 25, 2017 2:38 pm, awokd wrote: > > On Mon, December 25, 2017 2:24 pm, Blooorp wrote: > > > >> Le lundi 25 décembre 2017 15:11:51 UTC+1, awokd a écrit : > >> > >> > >>> On Mon, December 25, 2017 1:47 pm, Blooorp wrote: > >>> > >>> > >>>> Le lundi 25 décembre 2017 14:39:45 UTC+1, awokd a écrit : > >>>> > >>>> > >>>> > >>>>> On Mon, December 25, 2017 12:35 pm, Blooorp wrote: > >>>>> > >>>>> > >>>>> > >>>>>> Hey, I'm having some heavy trouble getting coreboot on my > >>>>>> G505s, > >>>>>> could you take a look at how I did it to see if you spot any > >>>>>> difference compared to how you did it? > >>>>>> > >>>>>> Here is how I built, flashed and tested it : > >>>>>> https://ghostbin.com/paste/wprhk > >>>>>> > >>>>>> > >>>>>> > >>>>> > >>>>> They seem to block Tor users. I can take a look if you put it on > >>>>> pastebin.com for example. > >>>> > >>>> Coreboot Lenovo G505s - Build/Flash/Test > >>>> https://pastebin.com/58K4VGgf > >>>> Full make output https://pastebin.com/nAPbNjJG > >>>> > >>>> > >>> > >>> I think you are very close to having it working, probably only the > >>> video. > >>> > >>> Try the following options in your menuconfig: > >>> General/Use CMOS for configuration values > >>> General/Allow use of binary-only repository > >>> Chipset/Add imc firmware (don't specify location or IDs, let it > >>> auto-populate) Chipset/SATA Mode 2 (don't specify location or IDs, let > >>> it auto-populate) Devices/Add a VGA BIOS image (don't specify location > >>> or IDs, let it > >>> auto-populate) Payload/SeaBIOS 1.11.0 > >>> > >>> > >>> And to keep this on topic for the Qubes Users mailing list, if you > >>> plan on running Qubes 4.0 on there, you'll also want this Coreboot > >>> patch currently waiting on code review: > >>> https://review.coreboot.org/#/c/coreboot/+/22843 . > >>> > >>> > >> > >> I do plan on running Qubes 4.0, how to I actually patch coreboot before > >> the build? > > > > See the changes I made in that link to those two files, and copy and > > paste them into your own source files manually. If you don't trust the > > blob I provided (and you shouldn't!) perform the following steps to verify > > it: > > > > > > Executing the following on a Debian Stretch install: > > dd skip=5284 iflag=skip_bytes > > if=/lib/firmware/amd-ucode/microcode_amd_fam15h.bin of=amd.bin xxd -i > > amd.bin Then copying and pasting. > > > > > > Executing these steps against > > coreboot/3rdparty/blobs/cpu/amd/family_15h/microcode_amd_fam15h.bin > > provides identical results. > > > Forgot to add, you should also include nvramcui as a secondary payload to > let you change CMOS options.
"Devices/Add a VGA BIOS image (don't specify location or IDs, let it auto-populate) " make: *** No rule to make target 'vgabios.bin', needed by 'build/coreboot.pre'. Stop. Looks like it didn't work, should I put the location and ID of the one I extracted from the stock bios? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/16d07c78-3d48-4d98-a22c-c3609dce98aa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
