I figured out what I've been being stupid about. Sometimes I think I wake up breathing stupid-air. I forgot that the port shown in QWS is the output port, and there's only ***ONE*** input port. Now wouldn't it be interesting to enable multiple input ports for two different keyboards! Wonder how the Q would handle those!
On Sat, 21 Feb 2015 09:25:29 -0600, you wrote: >IIRC, the Control Panel for what comes in. Going out it's in the track >properties, the third field, where you select what port you're using. I find >that renaming the ports for ease of use helps a lot to keep me in the right >brain hemisphere -- for instance, the first port (virtual cable) is renamed >Proteus VX on my system. > >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On Behalf Of >> Steve Matzura >> Sent: Saturday, February 21, 2015 9:00 AM >> To: QWS list >> Subject: Re: QWS List MIDI-Yoke and VSTHost >> >> I understand the concepts, yes, but where specifically, as in, what >> screen, is the connection made? In other words, where in QWS is it >> specified to take input from a hardware keyboard, then route it through >> a MIDI patcher like the Yoke or Loop-MIDI? I know how to do it in that >> other program that shall not be named (grin), but where does the >> crossconnection happen in QWS? >> >> On Sat, 21 Feb 2015 06:38:37 -0600, you wrote: >> >> >When I installed the stuff on my system it involved installing the >> >virtual MIDI port program, checking in QWS to make sure it installed >> >right and QWS could see it, and then going to the stand-alone and >> >configuring it to listen to that port for its MIDI In. The Native >> >Instruments stuff also had to have audio ports configured so it could >> >make a sound coming out. So it was just a virtual equivalent to >> hooking up a physical cable. >> > >> >> -----Original Message----- >> >> From: [email protected] [mailto:[email protected]] On Behalf >> >> Of Steve Matzura >> >> Sent: Saturday, February 21, 2015 12:45 AM >> >> To: QWS list >> >> Subject: Re: QWS List MIDI-Yoke and VSTHost >> >> >> >> Something for inclusion into this document, when it comes to >> >> Loop-MIDI, or probably any other virtual MIDI patch panel, is that >> it >> >> is about as clear as mud how to do the mapping between your >> >> controller, your crossconnector of choice, and an external VST- >> driven >> >> something. I'm scratching my cranium over this very issue on my >> >> friend's system that started me on this journey to begin with, and >> >> I'm either just not remembering something, or not seeing the forest >> >> for the trees, as it were. LM, Proteus VX, QWS, and the IRig driver >> >> for the keyboard controller are all installed and working. I just >> >> cannot remember how to connect the proverbial dots. The last time I >> >> did this was over three years ago, and the memory fades. LM is >> rather >> >> tight-lipped on help and documentation, so when it comes to that >> >> portion of your how-to, Nicole, a whole headed section on the >> >> interconnection/interplay between these things would be essential, >> in my unhumble opinion. >> >> To unsubscribe or change list options, see >> >> http://lists.andrelouis.com >> >> >> >> for archived list posts, see http://www.mail- >> >> archive.com/[email protected] >> > >> >To unsubscribe or change list options, see http://lists.andrelouis.com >> > >> >for archived list posts, see >> >http://www.mail-archive.com/[email protected] >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see http://www.mail- >> archive.com/[email protected] > >To unsubscribe or change list options, see http://lists.andrelouis.com > >for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
