Hi Justin,
> I am wanting to record the connect speed of our dialin customers - however
> I have had little success so far.
>
> We are running radiator 2.13 and using a mix of Cisco 2511/5300/5200
> routers. (I'm not expecting to get connect speeds from the 2511s though)
>
> I have got it logging things like called-station-id, but it isnt putting
> anything into the Connect-Info attribute.
>
> I've tried radius-server host 1.2.3.4 non-standard and radius-server vsa
> send accounting/authentication with no success.
I have a 5200 also and it doesn't report the connect speeds, in fact running
older
versions of the IOS it didn't report much of anything at all. I also have a
Bay 5399 and a Lucent PM3. They both report connect speeds, so as far as I
can tell, it's just Cisco's
Radius implementation. I'm running 11.3.7T and it doesn't support connect
speed logging. I didn't have to do a thing to get the other NASes to
display the connect speeds, they just report more radius accounting data to
the radius accounting server.
Regards,
Leigh Spiegel
WinShop Services
http://www.winshop.com.au/
PH: 07 5532 0355 Fax: 07 5531 4846 Mob: 0413 708 101
===
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
