Vincent,
Do this in the global config:
aaa accounting network stop-only radius
aaa accounting update newinfo
With the 'update newinfo' command, you'll get an updated Start record
with the Framed-IP-Address. Make sure you use stop-only on the network
aaa line or else you'll get 2 Start records - the one without the
Framed-IP and the updated one with it in there. If the 'newinfo'
command is not available, you'll need a newer IOS. I believe 11.3 and
higher support this command properly. Hope this helps.
--------------------------------------------------------------------------
Aaron Holtz
ComNet Inc.
Manager, Unix Systems Administration
Email: [EMAIL PROTECTED]
"It's not broken, it just lacks duct tape."
--------------------------------------------------------------------------
On Wed, 3 Mar 1999, Vincent Gillet wrote:
>[EMAIL PROTECTED] disait :
>
>> Our cisco's give us gallons of stuff with the non-standard setting and
>> c5200-i-l.113-8.T1 loaded. All the connect rate stuff is from their Ascend
>> compatibility code.
>
>We use Ascend as NAS, but we are testing Cisco for ISDN.
>It works OK, but I do not have "Framed-IP-Address" in Start Packet.
>Only in Stop.
>This is a drawback because I cannot see IP-Address when I list connected
>users from online Radiator DB.
>
>Did you find any solution to have Framed-IP-Address before Stop packet ?
>
>Thanks in advance.
>
>--
>Vincent Gillet E-mail: [EMAIL PROTECTED]
>Oleane
>Paris La d�fense
>France
>
>===
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
>
�
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
